✦ LIBER ✦

Determination of residual stresses in autofrettaged steel tubes by neutron and X-ray diffraction

✍ Scribed by L Pintschovius; E Macherauch; B Scholtes

Publisher: Elsevier Science
Year: 1986
Weight: 767 KB
Volume: 84
Category: Article
ISSN: 0025-5416
DOI: 10.1016/0025-5416(86)90234-x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Residual stress distribution in electrop

Residual stress distribution in electroplated ZnNi alloy layer determined by X-ray diffraction

✍ Toshihiko Sasaki; Yukio Hirose 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 406 KB

Studies on mechanical properties of poly

Studies on mechanical properties of polymer composites by X-ray diffraction. I. Residual stress in epoxy resin by X-ray diffraction

✍ Katsuhiko Nakamae; Takashi Nishino; Xu Airu; Takeshi Matsumoto; Tomoharu Miyamot 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 English ⚖ 404 KB 👁 2 views

Residual stress in epoxy resin cured on A1 plate was investigated by X-ray diffraction. Microdeformation of A1 crystal can be detected as a shift of X-ray diffraction peak induced by the stress resided. Results show that A1 plate is subjected to a uniaxial compressive stress of 29 MPa parallel to th

Structure of H(D)TaO3 determined by powd

Structure of H(D)TaO3 determined by powder X-ray and neutron diffraction

✍ M.T. Weller; P.G. Dickens 📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 374 KB

ChemInform Abstract: Crystal Structure D

ChemInform Abstract: Crystal Structure Determination of Metaperiodic Acid by Combined X-Ray and Neutron Diffraction.

✍ T. KRAFT; M. JANSEN 📂 Article 📅 2010 🏛 John Wiley and Sons ⚖ 28 KB 👁 2 views

Determination of the Crystal Structure o

Determination of the Crystal Structure of Mg(AlH4)2 by Combined X-Ray and Neutron Diffraction.

✍ A. Fossdal; H. W. Brinks; M. Fichtner; B. C. Hauback 📂 Article 📅 2005 🏛 John Wiley and Sons ⚖ 9 KB 👁 2 views

Use of X-ray diffraction and micromagnet

Use of X-ray diffraction and micromagnetic methods for a complete characterization of residual stress states in manufactured parts

✍ J. Epp; T. Hirsch; T. de Souza Rosendo 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 299 KB

## Abstract As machining induced residual stress states are an important factor for the distortion of parts during following heat treatments, a complete characterization of the components residual stress state is required. For a gain of time, magnetic and micromagnetic analysis has been compared wi