✦ LIBER ✦

Determination of mixed-mode interfacial fracture toughness for thermal barrier coatings

✍ Scribed by HongXia Deng; HuiJi Shi; HuiChen Yu; Bin Zhong

Publisher: Science in China Press (SCP)
Year: 2011
Tongue: English
Weight: 574 KB
Volume: 54
Category: Article
ISSN: 1672-1799
DOI: 10.1007/s11433-011-4278-0

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Mode II fracture toughness test for ther

Mode II fracture toughness test for thermally sprayed coatings

✍ P. I. Callus; C. C. Berndt 📂 Article 📅 1990 🏛 Springer Netherlands 🌐 English ⚖ 419 KB

Mixed mode fracture toughness: An empiri

Mixed mode fracture toughness: An empirical formulation for determination in asymmetric DCB specimens

✍ V. Mollón; J. Bonhomme; J. Viña; A. Argüelles 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 533 KB

Asymmetric DCB specimens (ADCB), in which the crack plane is out of the laminate midplane, are simple and useful test configurations to produce a mixed mode load state at the crack tip of the samples. This test configuration is as simple as pure mode I tests. However, the analytical procedures devel

Assessment of mixed-mode fracture toughn

Assessment of mixed-mode fracture toughness testing methods for rock

✍ I.L. Lim; I.W. Johnston; S.K. Choi 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 861 KB 👁 3 views

Analysis of a “barb test” for measuring

Analysis of a “barb test” for measuring the mixed-mode delamination toughness of coatings

✍ Yu-Fu Liu; Y. Kagawa; A.G. Evans 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 446 KB

Temperature dependence and fracture crit

Temperature dependence and fracture criterion of mixed mode I/II fracture toughness of phenolic resin for friction material

✍ Wakako Araki; Hiroki Shintaku; Hiroyuki Ohashi; Yoshiki Horiuchi; Yoshio Arai 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 649 KB

Finite element analysis of a barb test f

Finite element analysis of a barb test for thermal barrier coating delamination toughness measurement

✍ Ning-Yuan Cao; Yu-Fu Liu; Yutaka Kagawa 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 690 KB

The present study analyzes interface delamination behavior in the thermal barrier coating (TBC)/substrate system during a barb pullout test when the delamination crack is short. With the use of finite element analysis, strain energy release rates and phase angles of the delamination crack are obtain