Determination of estrogens in wastewater using three-phase hollow fiber-mediated liquid-phase microextraction followed by HPLC
✍ Scribed by Meihua Liu; Bin Qiu; Xia Jin; Lan Zhang; Xi Chen; Guonan Chen
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 920 KB
- Volume
- 31
- Category
- Article
- ISSN
- 1615-9306
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Three‐phase hollow fiber‐mediated liquid‐phase microextraction followed by HPLC was used for the determination of three synthetic estrogens, namely diethylstilbestrol, dienestrol, and hexestrol, in wastewater. Extraction conditions including organic solvent, volume ratio between donor solution and acceptor phase, extraction time, stirring rate, donor phase and acceptor phase were optimized. The target compounds were extracted from a 10 mL aqueous sample at pH 1.5 (donor solution) through a 45 mm in length hollow polypropylene fiber that was immersed in 1‐octanol in advance, and then the hollow fiber was filled with 10 μL 0.5 mol/L sodium hydroxide solution (acceptor phase). After a 40 min extraction, the acceptor phase was directly injected into an HPLC system for detection. Under the optimized extraction conditions, a large enrichment factor (more than 300‐fold) was achieved for the three estrogens. The determination limit at an S/N of 3 ranged from 0.25 to 0.5 μg/L for the estrogens. The recovery ratio was more than 86% in the determination of these estrogens in wastewater.
📜 SIMILAR VOLUMES
## Abstract Hollow fiber‐based liquid–liquid–liquid microextraction (HF‐LLLME) followed by flow injection analysis and diode array detection (FIA‐DAD) was applied as a simple and sensitive quantitative method for the determination of phenazopyridine in urine and plasma samples. Flow injection syste
## Abstract A simple, rapid, and efficient method, dispersive liquid–liquid microextraction (DLLME), has been developed for the extraction and preconcentration of decabrominated diphenyl ether (BDE‐209) in environmental water samples. The factors relevant to the microextraction efficiency, such as