𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Design strategies for dual-band Class-E power amplifier using composite right/left-handed transmission lines

✍ Scribed by Mury Thian; Vincent Fusco


Publisher
John Wiley and Sons
Year
2007
Tongue
English
Weight
381 KB
Volume
49
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

In this article we propose a technique for dual‐band Class‐E power amplifier design using composite right/left‐handed transmission lines, CRLH TLs. Design equations are presented and design procedures are elaborated. Because of the nonlinear phase dispersion characteristic of CRLH TLs, the single previous attempt at applying this method to dual band Class‐E amplifier design was not sufficient to simultaneously satisfy the minimum requirement of Class‐E impedances at both the fundamental and the second harmonic frequencies. This article rectifies this situation. A design example illustrating the synthesis procedure for a 0.5W‐5V dual band Class‐E amplifier circuit simultaneously operated at 900 MHz and 2.4 GHz is given and compared with ADS simulation. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 2784–2788, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.22836


📜 SIMILAR VOLUMES


Dual-band 1:3 series power divider based
✍ Xiao Liu; Chao Li; Fang Li 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 123 KB

## Abstract A dual‐band 1:3 series power divider that provides equal power splits to all three output ports is presented. To achieve dual‐band working, the divider employs, instead of conventional transmission lines of one wavelength, the composite right/left‐handed transmission lines (CRLH TLs) yi

A dual-band RF switch using composite ri
✍ Dong-Ryul Shin; JeongPyo Kim; ChangHyun Park; Wonmo Seong 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 405 KB

## Abstract A dual‐band RF switch that utilizes composite right/left handed (CRLH) transmissions‐lines(TLs) and PIN diodes is proposed. The design method of RF switch is based on the phase characteristic of the CRLH‐TL, which can be adjusted arbitrary, and employed conventional type‐II; filter stru