✦ LIBER ✦

Design of transverse slot arrays fed by a boxed stripline

✍ Scribed by Shavit, R.; Elliott, R.

Book ID: 120273181
Publisher: IEEE
Year: 1983
Tongue: English
Weight: 684 KB
Volume: 31
Category: Article
ISSN: 0018-926X
DOI: 10.1109/TAP.1983.1143113

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The design of transverse slot arrays fed

The design of transverse slot arrays fed by the meandering strip of a boxed stripline

✍ Robertson, R.; Elliott, R. 📂 Article 📅 1987 🏛 IEEE 🌐 English ⚖ 593 KB

Optimisation of radiation efficiency for

Optimisation of radiation efficiency for a transverse ground-plane slot in boxed-stripline

✍ Sangster, A.J.; Smith, P. 📂 Article 📅 1994 🏛 The Institution of Electrical Engineers 🌐 English ⚖ 540 KB

A design procedure for slot arrays fed b

A design procedure for slot arrays fed by single-ridge waveguide

✍ Kim, D.Y.; Elliott, R.S. 📂 Article 📅 1988 🏛 IEEE 🌐 English ⚖ 416 KB

Moment method analysis of infinite strip

Moment method analysis of infinite stripline-fed tapered slot antenna arrays with a ground plane

✍ Schaubert, D.H.; Aas, J.A.; Cooley, M.E.; Buris, N.E. 📂 Article 📅 1994 🏛 IEEE 🌐 English ⚖ 587 KB

A feasibility study of stripline-fed slo

A feasibility study of stripline-fed slots arranged as a planar array with circular grid and circular boundary

✍ Barnett, R.I.; Elliott, R.S. 📂 Article 📅 1989 🏛 IEEE 🌐 English ⚖ 614 KB

Design of a linear nonuniform CPW-fed sl

Design of a linear nonuniform CPW-fed slot array with reduced sidelobe levels

✍ J. P. Jacobs; J. Joubert 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 215 KB

## Abstract A linear nonuniform CPW‐fed slot array was designed using an iterative procedure. Theoretical and measured highest sidelobe levels of about −17 dB and −16 dB, respectively, were achieved. These are substantially lower than that of previously reported arrays of this sort, validating the