## Abstract The Genetic Algorithm (GA) optimization technique is applied to the optimization of a profiled corrugated horn, designed as a feed for a spaceβborne remote sensing reflectorβantenna system. In addition to using the standard GA (SGA) optimization technique, a profiled corrugated horn is
Design of corrugated horn antennas by evolutionary optimization techniques
β Scribed by Jamnejad, ; Hoorfar,
- Book ID
- 120326964
- Publisher
- IEEE
- Year
- 2004
- Tongue
- English
- Weight
- 434 KB
- Volume
- 3
- Category
- Article
- ISSN
- 1536-1225
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
## Abstract This paper presents the design of a wideband corrugated multisectional conical horn using a genetic algorithm (GA). The GA optimizes the length, flare angle, and first slot depth of each section of the horn in order to match the admittance, reduce the voltage standing wave ratio (VSWR)
## Abstract Some numerical results for a conical horn with three modifications of a hard corrugated PBG wall are presented. It is shown that a completely corrugated horn of diameter 4β5 wavelengths provides 80β87% aperture efficiency and a crossβpolar level below β30 dB for a horn length greater th
## Abstract This article presents the design and radiation characteristics of a dualβmode corrugated matched feed horn. This type of feed eliminates the unwanted high crossβpolarization of an offset parabolic reflector antenna and improves the overall performance of the antenna subβsystem. In a cyl