𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Design of a miniaturized planar antenna for FCC-UWB communication systems

✍ Scribed by L. Lizzi; F. Viani; R. Azaro; A. Massa

Publisher
John Wiley and Sons
Year
2008
Tongue
English
Weight
265 KB
Volume
50
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

In this letter, the design of a planar antenna compliant with FCC requirements for ultra‐wideband (UWB) transmission systems is described. With reference to a planar geometry on a dielectric substrate, the shape of the antenna is described by means of a spline‐based representation and it is determined by means of an optimization process aimed at finding the optimal descriptive parameters that allow to fit the user‐defined electrical and dimensional requirements. The reliability and effectiveness of the antenna prototype are assessed through simulations as well as experimental measurements. © Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 1975–1978, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23519

📜 SIMILAR VOLUMES

Design of a microstip fed step slot ante
Design of a microstip fed step slot antenna for UWB communication
✍ M. Gopikrishna; Deepti Das Krishna; C. K. Aanandan; P. Mohanan; K. Vasudevan 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 374 KB 👁 1 views

## Abstract The design and performance of a stepped slot printed monopole antenna in the ultrawideband is presented in this article. Multiple resonances generated by the stepped slot geometry are matched in the ultrawideband using a modified microstrip feed. The impedance bandwidth (SWR < 2) of the

Design of a planar half-circle-shaped UW
Design of a planar half-circle-shaped UWB notch antenna
✍ Hyo K. Lee; Jong K. Park; Jung N. Lee 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 153 KB 👁 1 views

## Abstract In this paper, we propose a small, lightweight, and low‐cost ultra‐wideband (UWB) antenna that exhibits a notch characteristic in the 5‐GHz WLAN band (5.15–5.825 GHz) using a planar half‐circle shape patch, a two‐step matching stub, a coplanar waveguide (CPW)‐type feed, and a hat‐shaped

A compact rectangular dielectric resonat
A compact rectangular dielectric resonator antenna for UWB wireless communication systems
✍ Mohssin Aoutoul; Otman El-Mrabet; Mohamed Essaaidi; Ahmed El Moussaoui 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 404 KB 👁 1 views

## Abstract A compact rectangular dielectric resonator antenna (DRA) is presented for ultra wide band communication systems. Ansoft HFSS 3D electromagnetic solver is used for the design optimization and measurement results are also provided. The proposed antenna has a low profile (∼3), a small size

Design and characteristics of a small U-
Design and characteristics of a small U-slotted planar antenna for IR-UWB
✍ Tan-Phu Vuong; Anthony Ghiotto; Yvan Duroc; Smail Tedjini 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 481 KB 👁 1 views

## Abstract This article introduces the design of a small (30 mm × 35 mm × 1.6 mm) band‐rejected U‐slotted planar antenna on FR4 substrate having a relative permittivity of ε~r~ = 4.4 for Impulse Radio Ultra Wide Band (IR‐UWB) systems. The antenna is fed by a microstrip line and rejects the frequen

Optimization of planar diamond antenna f
Optimization of planar diamond antenna for single-band and multiband UWB wireless communications
✍ Xuan Hui Wu; Zhi Ning Chen; Ning Yang 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 145 KB 👁 1 views

## Abstract A planar diamond antenna is optimized for UWB wireless communications. The optimal design guarantees a flat |__S__~21~| response over the UWB band for a corresponding transmitting/receiving antenna system. By revealing the reasons underlying an uneven |__S__~21~| response, this paper pr

Some design criteria for UWB planar mono
Some design criteria for UWB planar monopole antennas: Application to a slotted rectangular monopole
✍ D. Valderas; J. Meléndez; I. Sancho 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 274 KB 👁 1 views

## Abstract A method to increase the bandwidth of planar monopoles is presented. Following the provided design criteria, a simple rectangular‐shaped monopole is fit to operate at ultra‐wide‐band (UWB) frequency. The process involves two steps: (i) optimizing the perimeter and feeding dimensions and