## Abstract In this article, a new design of a broadband dual circularly polarized square slot antenna loaded with metallic strips is presented. The proposed dual circular polarization (CP) radiations are achieved by loading the square slot with a Tβshaped strip and two microstrip Tβjunctions. The
Design of a broadband square-ring-slot coupled patch antenna
β Scribed by Y. Qin; S. Gao; A. Sambell; M. Elsdon; E. Korolkiewicz
- Publisher
- John Wiley and Sons
- Year
- 2005
- Tongue
- English
- Weight
- 459 KB
- Volume
- 47
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
β¦ Synopsis
Collected f 0 results are shown in Figure 15. The center frequency varies with s/(s Ο© w g ) ratio around the theoretical value c 0 /(4h g ) Ο 1 GHz. However, it is noted that as the period length decreases (that is, (s Ο© w g )/ G decreases), f 0 depends less on the s/(s Ο© w g ) ratio. The dependence of f 0 on the incoming angle is small: f 0 tends to rise a little bit, when the incoming angle is changed from 90Β°to 45Β°.
5. CONCLUSION
Plane-wave scattering from finite-width corrugated plates has been studied using a 2D model and the MoM. Also, the reliability of the modelling method has been investigated. How the reflected-field polarization depends on the frequency and on the incoming angle has been of special interest. The frequency dependency of polarization has been studied via helicity p( f ). The results have shown how various parameters-the total plate width W p , bottom-plate thickness t B , groove-wall thickness s, period length, and incoming angle-affect the reflected-field helicity and bandwidth of a corrugated plate.
π SIMILAR VOLUMES
## Abstract This Letter describes a Uβshaped apertureβcoupled Uβslot triangular patch antenna fed by microstrip feed line. Because a thick aperture substrate with a dual Uβslot patch radiator are used in the design, a high level of coupling to the feed line results. The measured bandwidth of approx
## Abstract A novel design of a broadband circularly polarized square slot antenna fed by a single coplanar waveguide is proposed and discussed. The circularly polarized radiation is achieved by means of using an outer rectangular ring and an inner rectangular ring at the center of a square slot. T
The cacity-model rolutwn of the input impedance of a slot-coupled cylindrical-circular microstrip patch antenna is presented. The theoretical results are compared with measurements, and the accuracy of the cavity-model analysis is discussed. Effects of the cylinder size and the coupling slot length
## Abstract The design of a circularly polarized slot antenna fed by a single microstrip line is presented. The circularly polarized radiation is achieved by means of using a shorted squareβring slot. This proposed antenna has the fundamental resonant frequency of 2.4 GHz with the minimum return lo
## Abstract The compact designs of a shorted triangular patch antenna embedded with a V slot are proposed and studied. A broadband Vβslotted triangular patch antenna with one shorting wall is initially constructed as a reference. By inserting an additional shorting wall to this reference antenna, a