✦ LIBER ✦

Design considerations of the metal-clad ridge-waveguide laser with distributed feedback

✍ Scribed by Schimpe, R.

Book ID: 114454321
Publisher: The Institution of Electrical Engineers
Year: 1985
Weight: 302 KB
Volume: 132
Category: Article
ISSN: 0267-3932
DOI: 10.1049/ip-j:19850026

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Metal-clad ridge waveguide laser modes

✍ Al-Bader, S.J.; Jamid, H.A. 📂 Article 📅 1988 🏛 The Institution of Electrical Engineers ⚖ 558 KB

Calculation of the effective refractive-

Calculation of the effective refractive-index step for the metal-cladded-ridge-waveguide laser

✍ Amann, M.-C. ;Stegmuller, B. 📂 Article 📅 1981 🏛 The Optical Society 🌐 English ⚖ 451 KB

Fabrication of a distributed-feedback dy

Fabrication of a distributed-feedback dye laser with a grating structure in its plastic waveguide

✍ Oki, Yuji ;Yoshiura, Takeshi ;Chisaki, Yuichi ;Maeda, Mitsuo 📂 Article 📅 2002 🏛 The Optical Society 🌐 English ⚖ 589 KB

Optimum design of a distributed Bragg-re

Optimum design of a distributed Bragg-reflector laser with optical loss in the corrugated waveguide

✍ Masahiro Okuda; Kiyoshi Murata; Kiyoshi Oonaka 📂 Article 📅 1976 🏛 Elsevier Science 🌐 English ⚖ 250 KB

40-Gb/s Direct Modulation With High Exti

40-Gb/s Direct Modulation With High Extinction Ratio Operation of 1.3-μm InGaAlAs Multiquantum Well Ridge Waveguide Distributed Feedback Lasers

✍ Nakahara, K.; Tsuchiya, T.; Kitatani, T.; Shinoda, K.; Taniguchi, T.; Kikawa, T. 📂 Article 📅 2007 🏛 IEEE 🌐 English ⚖ 409 KB

Distributed feedback lasers with refract

Distributed feedback lasers with refractive-index-modulated upper cladding layer of the grating for reducing the spatial hole-burning effect

✍ Hong-Seok Lee; Hong-Kuk Kim; Boo-Gyoun Kim; Byoungho Lee 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 154 KB 👁 1 views

Figure 4 Measured and modeled quality factor for 5 and 10 pF varactors for frequencies of 1.045 and 2.438 GHz, respectively gate voltage of y0.5 V, the Q-factor of a 5 pF varactor is found to be more than 35 at 1.045 GHz. ## IV. CONCLUSIONS Polynomial expressions are used to model the effects of