perature superconductor are therefore suggested to be used in fabricating the meander slot antennas for applications w x where radiation efficiency is crucial 8 .
Design concepts of a novel microwave active filter
✍ Scribed by Moazzam, M. R. ;Aghvami, A. H.
- Publisher
- John Wiley and Sons
- Year
- 1992
- Tongue
- English
- Weight
- 684 KB
- Volume
- 2
- Category
- Article
- ISSN
- 1050-1827
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A novel microwave active bandpass filter structure, using a combination of microstrip line resonators and FETs, is described. The resulting filter not only produces positive gain but also has good performance regarding sharpness of skirts, rejection, and input and output return losses. Capability of constructing wider bandwidth and its superior performance at harmonic band frequencies over an end‐coupled filter structure are among advantages of this design.
📜 SIMILAR VOLUMES
## Hewlett Packard, Microwave component measurements amplitude & phase measurements of frequency translation devices using the HP8510 network analyzer, Product Note 8510-7. 3. C. John and .R.A. Speciale, A rigorous technique for measuring the scattering matrix of a multiport device with a 2-port ne
## Abstract A novel transversal filter using triple‐coupled‐line directional couplers and its design method are proposed. The performance of the proposed filter is verified by full‐wave analysis and measurement. The measured result is compared with the simulated one and good agreement is achieved.
## Abstract A novel concept of an alternating current (AC) dielectrophoretic filter with a three‐dimensional electrode array is presented. A filter is constructed by winding into layers around the core tube two sheets of woven metal wire‐mesh with several sheets of woven insulating wire‐mesh sandwi
## Abstract In this article, a triple‐band filter is presented.This design is based on the suitably defined frequency transformations and uses well‐established prototype synthesis techniques, and the coupling coefficients and the external quality factors can be calculated analytically. In the reali