𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Design and implementation of capacitive coupled-line structure bandstop filters

✍ Scribed by Man-Long Her; Ming-Wei Hsu; Wen Ko; Yu-Lin Wang; Kuo-Ming Wang; Chia-An Wang; Chou-Jung Hsu

Publisher
John Wiley and Sons
Year
2008
Tongue
English
Weight
265 KB
Volume
50
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

In this article, we propose and design bandstop filters with capacitive coupled‐line structure. The coupled‐line structure has small area, wide bandwidth, and steep insertion loss response. In simulation, we used Serenade and Sonnet EM simulation tools to analyze the characteristics of filters. In circuit implementation, we selected FR‐4 substrates. We used coupled‐lines on capacitive coupling bandstop filters to reduce the size about 58% and to create two attenuated poles for increasing bandwidth. First we derived the relation between the odd‐mode and even‐mode impedance theoretically. Then, we applied EM software tools to choose a proper coupling distance to implement circuit layout. Finally, the measured results were compared with the simulated results, and we found that coupled‐lines can effectively improve the reduction size of the filters. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 1363–1368, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23374

📜 SIMILAR VOLUMES

Erratum: Design and implementation of ca
Erratum: Design and implementation of capacitive coupled-line structure bandstop filters
✍ Man-Long Her; Ming-Wei Hsu; Wen Ko; Yu-Lin Wang; Kuo-Ming Wang; Chia-An Wang; Ch 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 54 KB

## Abstract Originally published Microwave Opt Technol Lett 50: 1363–1368, 2008. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 2480, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23625

Design and implementation of a dualband
Design and implementation of a dualband microwave filter using nonuniform lines
✍ Jhin-Fang Huang; Zong-Min Lyu 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 197 KB

## Abstract In this article, we propose a mapping method in which the system function of filter in z‐domain is founded by discrete‐time domain techniques as well as by chain‐scatte ring matrices of various transmission‐lines is derived to fulfill a dualbandpass microwave filter based on equal‐lengt

Design and implementation of multilayer
Design and implementation of multilayer coupled-resonator bandpass filter with harmonics suppression
✍ Wen-Jian Zhang; Zheng-Fan Li 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 199 KB

## Abstract In this article, a novel multilayer second‐order coupled‐resonator bandpass filter with harmonics suppression is proposed to improve the stopband characteristics. The proposed filter has been implemented in a five‐layer configuration using multilayer PCB technology. The measured results

Design and analysis of microstrip-line-c
Design and analysis of microstrip-line-coupled NRD guide filter based on integral equation techniques
✍ Duochuan Li; Francois Boone; Ke Wu 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 401 KB 👁 1 views

Integral equation techniques which include an order-reduced volume integral equation approach for NRD guide circuits and a generalized surface-volume integral equation approach for planar-NRD guide hybrid circuits have been presented in this article. A gap-coupled NRD guide filter is designed based

Design of microstrip bandpass and lowpas
Design of microstrip bandpass and lowpass filters using coupling matrix method and a new hairpin defected ground structure
✍ Ahmed Boutejdar; Abbas Omar 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 416 KB

## Abstract In this work, we present a novel compact hairpin defected ground structure (DGS) bandpass and lowpass microstrip filter using two hairpin‐slots etched in the ground plane. A compact microstrip BPF using coupled DGS resonators is designed using coupling matrix method. The designed BPF sh

Design of ultra-wideband bandpass filter
Design of ultra-wideband bandpass filter using step-impedance four-mode resonator and aperture-enhanced coupled structure
✍ Peng Cai 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 264 KB

## Abstract A novel ultra‐wideband (UWB) bandpass filter (BPF) is proposed and implemented by using a four‐mode resonator, which has four resonant frequencies within the passband of the filter. By enhancing the coupling between the resonator and the input/output feed lines, an UWB BPF with six tran