For MEMS devices with power consumption in the range of micro-watts, thermal energy harvesting becomes a viable candidate for power supply. This paper describes a multipurpose platform to fabricate thermoelectric generators in a combined surface and bulk micromachining process. The thermocouples are
Design and fabrication of ballistic constrictions for high temperature operation
โ Scribed by Gregory L. Snider; I-Hsing Tan; Mark S. Miller; Michael J. Rooks; Evelyn L. Hu
- Publisher
- Elsevier Science
- Year
- 1992
- Tongue
- English
- Weight
- 557 KB
- Volume
- 11
- Category
- Article
- ISSN
- 0749-6036
No coin nor oath required. For personal study only.
โฆ Synopsis
Quantized conductance is observed in a split gate structure at temperatures up to 3BK and with bias voltages of up to 12mV. This work addresses the limited temperature range and signal levels of ballistic constrictions by a comprehensive design strategy employing two dimensional self consistent Poisson-Schr&linger simulations to design a structure giving large energy subband separations. The large signal level of 7OBnA, made possible by a 1OmeV separation, allows measurements to be made without a lock-in amplifier.
๐ SIMILAR VOLUMES
separated in accordance with the procedure of Ross et al. The aqueous residues after removal of ethereal products were made alkaline and then extracted with ether, washed with water and dried. Removal of solvent afforded amines, meltingat 114ยฐ-1150C(Lit.8m.p. 115ยฐ-1180C) andmixedmelting points of th