The internal energy distributions arising from chargechanging collisions were measured as a function of scattering angle, 0, for the 'thermometer' molecule W(CO),. The experiments were performed by modifying a reversegeometry mass-analyzed ion kinetic energy (MIKE) spectrometer by adding angle-resolving slits which aUow measurement of the scattering angle in the non-focusing plane of the instrument. Charge exchange of W(C0):' with benzene to give W(CO):' , a d charge stripping of W(C0):' on collision with O2 to give W(CO)i+, were studied at 6 keV with the product ions being c o k t e d over hboratory scattering angles selected in the range 0-0.60 ' . Tbe results show that charge-chaaging collisions accompanied by scattering have the potential for depositing extremely large internal energies. The observation of the W(C0)" ion formed in dissociative charge stripping of W(C0):'
shows that it is possible to deposit at least 27 eV into the colliding W(C0);. ion; of this energy, 15 eV is d for the cbargwtripping process, leaving 12 eV of internal energy in the nascent W(CO):+*. Even greater internal energies (more than 15 ev) can be deposited into scattered W(CO):' * prodwed by charge exchange of the doubly charged ion. The availability of such high internal energies has potential use in causing dissociation of refractory ions such as those of biomolecules. The average internal energy, eAVE, deposited increases with the scattering angle at a rate of 10 eV degree-' for charge exchange, and at approximately 5 eV degree-' for charge stripping and for simple collision-induced dissociation (CID). This observation suggests that Don-Zero angle charge stripping and CID may occur via similar mechanisms in which direct vibrational activation occurs in small impact parameter collisions which also lead to angular scattering. The higher internal energies and larger 8 ~y ~ YS. 8 dependence observed for charge exchange are consistent with the formation of the products upon a highly repulsive surface associated with coulombic repulsion between the separating products.