✦ LIBER ✦

Deformation behavior in Zr702 processed by equal-channel angular pressing at room temperature

✍ Scribed by B.S. Lee; M.H. Kim

Publisher: Elsevier Science
Year: 2006
Tongue: English
Weight: 310 KB
Volume: 423
Category: Article
ISSN: 0921-5093
DOI: 10.1016/j.msea.2005.09.129

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Compressive deformation of Mg–Zn–Y–Zr al

Compressive deformation of Mg–Zn–Y–Zr alloy processed by equal channel angular pressing

✍ M.Y. Zheng; S.W. Xu; X.G. Qiao; K. Wu; S. Kamado; Y. Kojima 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 428 KB

Tensile Deformation Behaviors of CuNi Al

Tensile Deformation Behaviors of CuNi Alloy Processed by Equal Channel Angular Pressing

✍ Jiangwei Wang; Peng Zhang; Qiqiang Duan; Gang Yang; Shiding Wu; Zhefeng Zhang 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 1015 KB

## Abstract The microstructure of the CuNi alloy specimen ER is mainly elongated coarse grains. However, the microstructure of the specimen EH is inhomogeneous and some recrystallized sub‐grains form. In addition, the misorientation angles of the specimens ER and EH are mainly smaller than 15°, sh

Deformation behavior and strain homogene

Deformation behavior and strain homogeneity in equal channel angular extrusion/pressing

✍ A.V. Nagasekhar; Yip Tick-Hon; H.P. Seow 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 593 KB

Equal channel angular extrusion/pressing (ECAE/ECAP) is a novel severe plastic deformation (SPD) technique widely used for fabrication of bulk nanostructured materials, consolidation of powder materials, and property enhancement of tubular materials. The microstructure and mechanical properties of t

Creep processes in pure aluminium proces

Creep processes in pure aluminium processed by equal-channel angular pressing

✍ V. Sklenicka; J. Dvorak; P. Kral; Z. Stonawska; M. Svoboda 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 382 KB

Flow behavior of a superplastic Zn–22% A

Flow behavior of a superplastic Zn–22% Al alloy processed by equal-channel angular pressing

✍ Megumi Kawasaki; Terence G. Langdon 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 435 KB

Record Superplastic Ductility in a Magne

Record Superplastic Ductility in a Magnesium Alloy Processed by Equal-Channel Angular Pressing

✍ R. B. Figueiredo; T. G. Langdon 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 125 KB

Fig. 1. Appearance of specimens tested to failure at 473 K with an initial strain rate of 1.0 × 10 -4 s -1 after processing by ECAP for different numbers of passes: the upper specimen is untested.