Cure processing modeling and cure cycle simulation of epoxy-terminated poly(phenylene ether ketone). II. Chemorheological modeling

✍ Scribed by Qiang Wang; Tianbai He; Ping Xia; Tianlu Chen; Baotong Huang

• Publisher: John Wiley and Sons
• Year: 1997
• Tongue: English
• Weight: 245 KB
• Volume: 66
• Category: Article
• ISSN: 0021-8995
• DOI: 10.1002/(sici)1097-4628(19971024)66:4<799::aid-app20>3.0.co;2-l

✦ Synopsis

Chemorheology and corresponding models for an epoxy-terminated poly-(phenylene ether ketone) (E-PEK) and 4,4 -diaminodiphenyl sulfone (DDS) system were investigated using a differential scanning calorimeter (DSC) and a cone-andplate rheometer. For this system, the reported four-parameter chemorheological model and modified WLF chemorheological model can only be used in an isothermal or nonisothermal process, respectively. In order to predict the resin viscosity variation during a stepwise temperature cure cycle actually used, a new model based on the combination of the four-parameter model and the modified WLF model was developed. The combined model can predict the resin viscosity variation during a stepwise temperature cure cycle more accurately than the above two models. In order to simplify the establishment of this model, a new five-parameter chemorheological model was then developed. The parameters in this five-parameter model can be determined through very few rheology and DSC experiments. This model is practicable to describe the resin viscosity variation for isothermal, nonisothermal, or stepwise temperature cure cycles accurately. The five-parameter chemorheological model has also successfully been used in the E-PEK systems with two other curing agents, i.e., the diamine curing agent with the addition of a boron trifluride monoethylamine (BF 3 -MEA) accelerator and an anhydride curing agent (hexahydrophthalic acid anhydride).