𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Crystallographic structure and surface morphology of sintered carbonated apatites

✍ Scribed by Ellies, L. G. ;Nelson, D. G. A. ;Featherstone, J. D. B.

Publisher
John Wiley and Sons
Year
1988
Tongue
English
Weight
733 KB
Volume
22
Category
Article
ISSN
0021-9304

No coin nor oath required. For personal study only.

✦ Synopsis

Densely sintered synthetic hydroxyapatite (HA) is used as an implant material because of its excellent tissue biocompatibility. In order to maximize the biological potential of this calcium phosphate, we have investigated the incorporation of carbonate into HA to make a material which more closely resembles the mineral found in bones and teeth. The aim of the present study was to determine the conditions under which sintered carbonated apatites of specific carbonate content could be produced. The apatites were prepared by heating compressed pellets of precipitated carbonated apatite under a carbon dioxide/steam or nitrogen/steam atmosphere between 825 and 1050 degrees C. The products were analyzed chemically and the surfaces examined by x-ray diffraction, infrared spectroscopy, reflected light microscopy, and scanning electron microscopy. The results showed that carbonate loss during sintering could be reliably predicted, making it possible to produce materials with specific carbonate content, and with specific physical and chemical composition.

πŸ“œ SIMILAR VOLUMES

Difference of bond bonding behavior amon
Difference of bond bonding behavior among surface active glasses and sintered apatite
✍ Fujiu, T. ;Ogino, M. πŸ“‚ Article πŸ“… 1984 πŸ› John Wiley and Sons 🌐 English βš– 790 KB

Three types of surface active glasses and sintered apatite were implanted in femurs of rabbits for 8 and 16 weeks and subjected to the push-out test to measure the bone bonding strength. The apatite surface layers of these materials, which were formed under in uitro treatment, were studied using IR,

Evidence of octacalcium phosphate and Ty
Evidence of octacalcium phosphate and Type-B carbonated apatites deposited on the surface of explanted acrylic hydrogel intraocular lens
✍ Lin, Shan-Yang ;Chen, Ko-Hua ;Li, May-Jane ;Cheng, Wen-Ting ;Wang, Shun-Li πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 180 KB

## Abstract Fourier‐transform infrared (FTIR) microspectroscopy combining with attenuated total reflection (ATR) microsampling technique and micro‐Raman spectrophotometer were used to detect the deposited materials on the surface of acrylic hydrogel intraocular lens (IOL) with or without ocular imp

The structural characteristics and mecha
The structural characteristics and mechanical behaviors of nonstoichiometric apatite coatings sintered in air atmosphere
✍ Han, Yong ;Xu, Kewei ;Lu, Jian ;Wu, Zhu πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 371 KB πŸ‘ 1 views

Two types of nonstoichiometric apatite coatings on Ti6Al4V substrates were prepared in our laboratory by electrodeposition and hydrothermal synthesis. One was composed of highly pure needle-like calcium-deficient hydroxyapatite, and the other consisted of needle-like calciumdeficient hydroxyapatite

Effect of sintering on porosity, phase,
Effect of sintering on porosity, phase, and surface morphology of spray dried hydroxyapatite microspheres
✍ Ai-Juan Wang; Yu-Peng Lu; Rui-Fu Zhu; Shi-Tong Li; Gui-Yong Xiao; Guang-Feng Zha πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 287 KB πŸ‘ 1 views

## Abstract This article deals with the effect of sintering temperature on the physical and chemical characteristics of hydroxyapatite microspheres (HAMs) obtained by spray drying method. A set of specimens were sintered in a conventional furnace at 500–1100Β°C. The surface morphology, phase composi