✦ LIBER ✦

Crystallinity as a selection criterion for engineering properties of high density polyethylene

✍ Scribed by D. Mark Hoffman; Barbara M. McKinley

Publisher: Society for Plastic Engineers
Year: 1985
Tongue: English
Weight: 731 KB
Volume: 25
Category: Article
ISSN: 0032-3888
DOI: 10.1002/pen.760250909

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Procedure for calculating the crystallin

Procedure for calculating the crystallinity of ethylene–vinyl acetate copolymers and low-density polyethylene as a function of temperature

✍ A. Barlow; M. Young 📂 Article 📅 1970 🏛 John Wiley and Sons 🌐 English ⚖ 282 KB 👁 2 views

Correlation between oxidation resistance

Correlation between oxidation resistance and crystallinity of Ti–Al as a barrier layer for high-density memories

✍ S Aggarwal; B Nagaraj; I.G Jenkins; H Li; R.P Sharma; L Salamanca-Riba; R Ramesh 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 376 KB

Use of Nitrogen as a Blowing Agent for t

Use of Nitrogen as a Blowing Agent for the Production of Fine-Celled High-Density Polyethylene Foams

✍ John W. S. Lee; Chul B. Park 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 818 KB

## Abstract Summary: While many experiments have been performed to examine the effects of administering CO~2~ as a blowing agent in the foaming process, very few studies have investigated the use of N~2~ for this purpose. In this study, foaming experiments were conducted in extrusion using HDPE as

Allowance for the effect of hydrostatic

Allowance for the effect of hydrostatic pressure in describing the nonlinear viscoelastic properties of high-density polyethylene

✍ A. M. Lokoshchenko; N. I. Malinin; V. V. Moskvitin; G. K. Stroganov 📂 Article 📅 1976 🏛 Springer US 🌐 English ⚖ 475 KB

The effect of annealing at 135° on the m

The effect of annealing at 135° on the mechanical properties of injection molded high density polyethylene-polypropylene blends

✍ R. A. Varin; D. Djokovic 📂 Article 📅 1988 🏛 Society for Plastic Engineers 🌐 English ⚖ 759 KB

Automated Raman Spectroscopy as a Tool f

Automated Raman Spectroscopy as a Tool for the High-Throughput Characterization of Molecular Structure and Mechanical Properties of Polyethylenes

✍ Claus Gabriel; Dieter Lilge; Marc O. Kristen 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 115 KB

## Abstract Raman spectroscopy, which does not require a time‐consuming sample preparation, is described as an analytical tool for the high‐throughput characterization of polyethylenes. The content of comonomer and the amount of methyl groups per 1 000 carbon atoms of polyethylenes can be predicted