𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Cross-coupled dual-band filter using folded tri-section stepped impedance resonators

✍ Scribed by J. W. Fan; C. H. Liang; B. Wu


Publisher
John Wiley and Sons
Year
2008
Tongue
English
Weight
155 KB
Volume
50
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

A compact dual‐band bandpass filter using folded tri‐section stepped impedance resonators (FTSIRs) is proposed in this article. Resonance characteristics of the tri‐section stepped impedance resonator (TSIR) are derived and described in detail. A cross‐coupled dual‐band filter for WLAN(2.4/5.2 GHz) is designed with four FTSIRs. The measurement of the filter is in good agreement with the simulation. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 407–409, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23110


📜 SIMILAR VOLUMES


Design of multilayered dual-band bandpas
✍ Min-Hang Weng; Yu-Chi Chang; Hung-Wei Wu; Chun-Yueh Huang 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 306 KB

## Abstract In this letter, a multilayered dual‐band bandpass filter (BPF) using cross‐coupled stepped impedance resonators (SIRs) is designed and implemented. By determining the impedance ratio (K) and physical length (α) of the SIRs, the dual‐band response at 2.4/5.2 GHz can be achieved. Cross‐co

Design of tri-band microstrip bandpass f
✍ Haiwen Liu 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 223 KB

## Abstract A tri‐band microstrip bandpass filter using folded tri‐section stepped‐impedance resonators is designed, analyzed, and fabricated in this article.Furthermore, the filter's coupling structure analysis and equivalent circuit model are discussed theoretically, and the design methodology of

Compact dual-band bandpass filter using
✍ He-Ming Xu; Zhong-Yin Xiao; Hong-Hong Hu 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 204 KB

## Abstract A new dual‐band bandpass filter (BPF) for 2.4/5.2 GHz WLAN systems using two‐stepped impedance resonators is presented. With new properly coupled structure, this filter appears very compact and easy to be fabricated. Measured results show that this BPF has low insertion loss of 0.3 dB a

Compact multilayer dual-band filter usin
✍ A. Djaiz; M. Nedil; A. M. Habib; T. A. Denidni 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 289 KB

## Abstract In this article, a new miniaturized configuration of single‐input‐single‐output dual‐band bandpass filter operating at ISM 2.45 GHz and UNII 5.8 GHz frequency bands using a multilayer structure with stepped‐impedance resonators is presented. A coupling aperture is introduced in a common

A compact dual-band bandpass filter usin
✍ Fu-Chang Chen; Qing-Xin Chu 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 204 KB

## Abstract We propose a compact dual band bandpass filter (BPF) using meandering stepped impedance resonators (SIRs). By appropriately selecting the impedance ratio (K) of the SIR, the harmonic frequencies can be tuned for generating the dual‐passband response. Using this structure, the bandwidth

Design of a compact dual-band bandpass f
✍ Sheng-Hsiung Chang; Min-Hang Weng; Hon Kuan 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 256 KB

## Abstract We propose a compact dual band bandpass filter (BPF) using trisection stepped impedance resonators (SIRs). By appropriately selecting the impedance ratio (K) and length ratio (α) of the SIR, the harmonic frequencies can be tuned for generating the dual‐passband response. The BPF has goo