## Abstract A new dual‐band bandpass filter (BPF) for 2.4/5.2 GHz WLAN systems using two‐stepped impedance resonators is presented. With new properly coupled structure, this filter appears very compact and easy to be fabricated. Measured results show that this BPF has low insertion loss of 0.3 dB a
A compact dual-band bandpass filter using meandering stepped impedance resonators
✍ Scribed by Fu-Chang Chen; Qing-Xin Chu
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 204 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
We propose a compact dual band bandpass filter (BPF) using meandering stepped impedance resonators (SIRs). By appropriately selecting the impedance ratio (K) of the SIR, the harmonic frequencies can be tuned for generating the dual‐passband response. Using this structure, the bandwidth of each passband can be controlled independently by adjusting the coupling gap and the spur‐line length. The BPF has good dual‐passband performance at 2.4/5.25 GHz and has a very smaller area in comparison with the previous works. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 2619–2621, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23720
📜 SIMILAR VOLUMES
## Abstract We propose a compact dual band bandpass filter (BPF) using trisection stepped impedance resonators (SIRs). By appropriately selecting the impedance ratio (K) and length ratio (α) of the SIR, the harmonic frequencies can be tuned for generating the dual‐passband response. The BPF has goo
## Abstract This letter presents a compact triple‐band bandpass filter using pseudointerdigital trisection stepped impedance resonators (SIR). By tuning the impedance ratio and physical length of trisection SIRs, the BPF has good triple‐band performances at 1.57‐/2.45‐/5.25‐GHz and high isolation a
## Abstract In this article, a new miniaturized configuration of single‐input‐single‐output dual‐band bandpass filter operating at ISM 2.45 GHz and UNII 5.8 GHz frequency bands using a multilayer structure with stepped‐impedance resonators is presented. A coupling aperture is introduced in a common
## Abstract A novel dual‐band bandpass filter using stepped impedance resonator is proposed in this letter. New coupling structures are illustrated to replace the normal counterparts, the circuit size is reduced about 40% compared with the conventional BPF with the same specifications, while the ne
## Abstract A folded quarter‐wavelength stepped impedance resonator (SIR) is proposed with a largely reduced size. A bandpass filter with center frequency of 1.85 GHz using the SIRs is designed, fabricated, and measured. This compact filter covers an area less than 10 mm × 10 mm, which makes it sui