✦ LIBER ✦

Critique on fracture criteria in mixed-mode-loading

✍ Scribed by K.-F Fischer

Publisher: Elsevier Science
Year: 1985
Tongue: English
Weight: 482 KB
Volume: 3
Category: Article
ISSN: 0167-8442
DOI: 10.1016/0167-8442(85)90021-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Review of brittle fracture criteria in c

Review of brittle fracture criteria in case of static and cyclic mixed mode loading

✍ K.-F. Fischer 📂 Article 📅 1984 🏛 Elsevier Science 🌐 English ⚖ 818 KB

Mixed mode fracture criteria for an inte

Mixed mode fracture criteria for an interface crack

✍ Yuuki Ryoji; Liu Jin-Qiao; Xu Jin-Quan; Ohira Toshiaki; Ono Tomoyoshi 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 744 KB

Fracture tests of aluminum/epoxy dissimilar materials with an interface crack are carried out under comprehensive mixed mode conditions, using circular disk type (brazil-nut-sandwich) specimens under compression or tension loading in various directions. The stress intensity factors for an interface

Mixed mode fracture in epicycloid specim

Mixed mode fracture in epicycloid specimens II. Point force loading

✍ W.H. Müller; H. Gao 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 737 KB

The method of complex potentials is used to obtain an analytical solution for the stresses in epicycloidal specimens due to point force loading. The solution is used to obtain an analytical expression for the stress intensity factors of cusp-like cracks in such specimens which can be considered as a

Fracture tests for ceramics under mode-I

Fracture tests for ceramics under mode-I, mode-II and mixed-mode loading

✍ T. Fett; G. Gerteisen; S. Hahnenberger; G. Martin; D. Munz 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 594 KB

Weakest-link failure prediction for cera

Weakest-link failure prediction for ceramics IV: Application of mixed-mode fracture criteria for multiaxial loading

✍ L. Dortmans; G. de With 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 544 KB

Strength data obtained from uniaxial and biaxial bend tests on two alumina ceramics have been analysed by means of a weakest-link model with different mixedmode .fracture criteria and crack shapes. Taking the data .from three-and four-point bend tests as a reference, strength predictions for the bal

Incipient fracture angle, fracture loci

Incipient fracture angle, fracture loci and critical stress for mixed mode loading

✍ Jehuda Tirosh 📂 Article 📅 1977 🏛 Elsevier Science 🌐 English ⚖ 583 KB

A prediction of the direction of incipient crack growth in brittle-like materials and the associated fracture loci under mixed mode loading is proposed. It is postulated that the direction of unstable crack propagation is determined by the "weakest" near-tip element defined as the one which would re