✦ LIBER ✦

Mixed mode fracture criteria for an interface crack

✍ Scribed by Yuuki Ryoji; Liu Jin-Qiao; Xu Jin-Quan; Ohira Toshiaki; Ono Tomoyoshi

Publisher: Elsevier Science
Year: 1994
Tongue: English
Weight: 744 KB
Volume: 47
Category: Article
ISSN: 0013-7944
DOI: 10.1016/0013-7944(94)90094-9

No coin nor oath required. For personal study only.

✦ Synopsis

Fracture tests of aluminum/epoxy dissimilar materials with an interface crack are carried out under comprehensive mixed mode conditions, using circular disk type (brazil-nut-sandwich) specimens under compression or tension loading in various directions. The stress intensity factors for an interface crack are analyzed by the boundary element method, and the fracture criteria for an interface crack are investigated and discussed based on the interfacial fracture mechanics. In the brazil-nut-sandwich compression tests, the crack kinks into the epoxy resin and the fracture angles are well predicted by the umnar criterion proposed by the authors. In the brazil-nut-sandwich tension tests, the crack grows along the interface and the mixed mode fracture criteria are clarified experimentally. A method to evaluate the possible path and the strength of the interface crack is proposed by comparison with both criteria.

📜 SIMILAR VOLUMES

Analysis and modification of fracture cr

Analysis and modification of fracture criteria for mixed-mode crack

✍ Xuefeng Wu; Xinming Li 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 797 KB

In this paper the four common-used criteria for a mixed-mode crack are analysed and modified using the first two terms of Williams' stress series. In the new criteria the singular core is substituted by a plastic zone. These modified criteria take into account the influence of the plastic zone on cr

An energy fracture criterion for mixed m

An energy fracture criterion for mixed mode cracks

✍ Chun-Yuan Zhang 📂 Article 📅 1982 🏛 Elsevier Science 🌐 English ⚖ 87 KB

Furthermore, we have proved that the null space of the linear operator of Piola-Kirchhoff stress history functional is the direct sum of the null space of linear operators for 6-D vector subspace N, and N,. Here we can naturally classify the fracture of isotropic material with memory into two types.

Mixed mode crack propagation and fractur

Mixed mode crack propagation and fracture in concrete

✍ S.E. Swartz; N.M. Taha 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 603 KB

## Ahatract-Results of experiments using the Iosipescu test specimen in which axial compression has been introduced in addition to the shearing loads are reported here. Different crack paths and fracture modes were obtained depending on the presence or absence of axial compression. Computer model

Application of combined-mode fracture cr

Application of combined-mode fracture criteria to surface crack problems

✍ Xiao-Ming Chen; Gui-Qiong Jiao; Zhen-Yuan Cui 📂 Article 📅 1986 🏛 Elsevier Science 🌐 English ⚖ 895 KB

## Abstmct-In this paper the rn~~urn strain-energy release-rate criterion, the minimum strainenergy density-factor criterion and the maximum normal-stress criterion have been applied to a finite-width plate with a semi-elliptical surface crack subjected to uniform tension and uniform shear at infi

Mixed mode fracture characterization of

Mixed mode fracture characterization of hydroxylapatite–titanium alloy interface

✍ Dr. Kenneth A. Mann; Avram A. Edidin; Roy K. Kinoshita; Michael T. Manley 📂 Article 📅 1994 🏛 Wiley (John Wiley & Sons) 🌐 English ⚖ 724 KB

## Abstract Cantilever beam and four‐point bend specimen geometries were used to experimentally determine the critical energy release rates for a plasma sprayed hydroxylapatite‐titanium alloy (HA–Ti alloy) interface. A locus of energy release rates as a function of crack tip phase angle was determi

A mixed mode rock fracture model for the

A mixed mode rock fracture model for the prediction of crack path

✍ Lewis, R. W.; Koosha, B. 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 182 KB 👁 2 views

Crack propagation in rocks is simulated by using a displacement substitution method based on a mixed mode fracture criterion. The main advantage of this model is that it can distinguish between mode I and mode II stress intensity factors simultaneously. A typical finite element program is used to co