Multifilamentary Nb3Sn composite conductors with 65 880 and 421 160 filaments have been fabricated in long lengths by the internal tin-diffusion method. Filament diameters are in the range from 31.1 nm to 274 nm. Conductors were heat treated for 1 to 53 days at various temperatures from 400ยฐC to 700
Critical current of multifilamentary Nb3Sn conductors up to 18 t
โ Scribed by G. Rupp; E. Springer; S. Roth
- Publisher
- Elsevier Science
- Year
- 1977
- Tongue
- English
- Weight
- 369 KB
- Volume
- 17
- Category
- Article
- ISSN
- 0011-2275
No coin nor oath required. For personal study only.
โฆ Synopsis
The critical current I c of Nb aSn conductors containing 1615 or 3721 filaments was measured in magnetic flux densities up to 18 7". The magnetic field was generated by a Bitter magnet. The overall current density of the conductor was 5 x 104 A cm-2 at 10 Tand 5 x 103 A cm -2 at 18 7". Values of up to 21.6 T were obtained for the upper critical flux density Bc2. The influence of the diffusion conditions upon I c, Bc2 and the superconducting transition temperature T c have been related to the fraction of the total conductor cross-section taken up by Nb3Sn. This fraction serves as a rough measure of the pressure exerted upon the Nb3Sn within the conductor.
๐ SIMILAR VOLUMES
The critical current degradation of multifilamentary NbsSn superconducting composites strained mechanically at room temperature has been investigated. The experimental results show that the effects of the Nb$n layer thickness and the speci.men wire structure, such as monolithic and stranded cable on
Critical current measurements on several Nb3Sn superconductors were made as part of an interlaboratory comparison (round robin). These measurements were made in conjunction with twenty-four laboratories from the European Economic Community, Japan and the USA as part of the Versailles Agreement on Ad