Tensile creep tests in the [011] direction have been performed on two specimens of SRR99 at 1173 K under a load of 300 MPa. The microstructure was analysed by transmission electron microscopy investigations after plastic strains of 0.1% and 0.29%. At both strains, the 7' phase is not sheared by disl
Creep of PE-10 nickel-base superalloy at 973 K
β Scribed by A. J. Marzocca; A. C. Picasso
- Publisher
- Springer
- Year
- 1994
- Tongue
- English
- Weight
- 853 KB
- Volume
- 29
- Category
- Article
- ISSN
- 0022-2461
No coin nor oath required. For personal study only.
β¦ Synopsis
Creep data, at 973 K and stresses between 355 and 512 MPa, in flat specimens of PE-IO nickel-base superalloy are reported. The data have been interpreted in terms of a constitutive equation based on a creep model involving dislocation climb and cross-slip over the strengthening phase. Strain-rate sensitivity and apparent activation energy have also been measured and analysed in the frame of the proposed model.
π SIMILAR VOLUMES
## Abstract Various heat treatments of the singleβcrystal nickelβbase superalloy SRR99 have been carried out to produce a wide range of initial Ξ³β² phase morphology. The cavitation damage has been studied after creep fracture at 850Β°C and stresses between 400MPa and 650 Mpa. The crep fracture surfac
## The resonance Raman profile for the Schiff-base complex N,N'-bis(salicylaldehyde)-odiaminobenzene nickel(H) has been measured at 290 and 10 K and the main peaks assigned. A broad fluorescence with a maximum at ca. 672 nm reduced the sensitivity of some measurements at room temperature but at 10