Crack propagation during steady state creep
β Scribed by J.T. Barnby
- Publisher
- Elsevier Science
- Year
- 1975
- Tongue
- English
- Weight
- 402 KB
- Volume
- 7
- Category
- Article
- ISSN
- 0013-7944
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
The creep crack propagation behavior of a Cr-Mo-V rotor steel has been investigated at 538Β°C using time-dependent fracture mechanics concepts. The creep crack propagation lives and the creep deflection rates of double-edge-notched (DEN) specimens were estimated using previous data from compact-type
The steady-state problem of a semi-infinite shear crack propagating with a velocity greater than the shear-wave velocity was considered. The crack was modeled by a straight cut which extended in its own plane under the action of in-plane shear stresses uniformly distributed over a segment of the cra
Stress reduction tests were performed during steady state tensile creep of AI-IL wt.",, Zn at 23 K and constant stresses between 10 and 30MPa. The decrease of dislocation density and the variation of creep rate following the stress reductions were measured. While after small stress reductions the cr