✦ LIBER ✦

Corrosion of Fe-Cr-Mn alloys in thermally convective lithium

✍ Scribed by T.F. Tortorrelli; J.H. DeVan

Publisher: Elsevier Science
Year: 1986
Tongue: English
Weight: 943 KB
Volume: 141-143
Category: Article
ISSN: 0022-3115
DOI: 10.1016/0022-3115(86)90057-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Characteristics of point defects and the

Characteristics of point defects and their clustering processes in FeMnCr and FeMnSiCr alloys

✍ H. Inoue; T. Muroga; Y. Miyamoto; N. Yoshida 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 411 KB

Neutron irradiation of FeMn, FeCrMn a

Neutron irradiation of FeMn, FeCrMn and FeCrNi alloys and an explanation of their differences in swelling behavior

✍ F.A. Garner; H.R. Brager; D.S. Gelles; J.M. McCarthy 📂 Article 📅 1987 🏛 Elsevier Science 🌐 English ⚖ 788 KB

High temperature corrosion of Fe-Cr-Mn-a

High temperature corrosion of Fe-Cr-Mn-alloys in H2-H2S and H2-H2O-H2S gas mixtures

✍ Dipl.-Min Panayiotis Papaiacovou; Prof. Dr. Hans Jürgen Grabke; Dipl.-Ing. (FH) 📂 Article 📅 1985 🏛 John Wiley and Sons 🌐 German ⚖ 542 KB

The sulfidation of Fe-20%Cr-30%Mn, Fe-25%Cr-20%Mn and Fe-25%Cr was studied at 700 "C in H2-H2S and the oxidation and sulfidation in H2-H,0-H,S after preoxidation in H,-H,O. The sulfidation rate is strongly increased for the Mn-containing alloys, layers of (Mn,Cr)S and (Mn,Fe)Cr2S4 are formed. Also

The breakaway corrosion of FeCr alloys

The breakaway corrosion of FeCr alloys in atmospheres containing sulfur and oxygen

✍ S.-H. Choi; J. Stringer 📂 Article 📅 1987 🏛 Elsevier Science ⚖ 531 KB

Stress corrosion cracking of the austeni

Stress corrosion cracking of the austenitic Fe-Al-Mn alloy in chloride environment

✍ S. C. Tjong 📂 Article 📅 1986 🏛 John Wiley and Sons 🌐 German ⚖ 1011 KB

The SCC behavior of Fe-8.7A1-29.7Mn-1.04C alloy in a 20% sodium-chloride solution (100 "C) has been investigated by the slow strain rate method. The results showed that the alloy was susceptible to SCC only at the free corrosion potential and at the applied strain rate of 2.8 x lO-'/s. Application o

Corrosion and passivation of amorphous a

Corrosion and passivation of amorphous and crystalline FeCr alloys in ethanol/water/HCl mixtures

✍ B. Elsener; S. Virtanen; H. Boehni 📂 Article 📅 1987 🏛 Elsevier Science 🌐 English ⚖ 727 KB