𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Corrosion Books: Corrosion of Austenitic Stainless Steels. By: H. S. Khatak, Baldev Raj

✍ Scribed by J. W. Erning

Publisher
John Wiley and Sons
Year
2004
Tongue
German
Weight
51 KB
Volume
55
Category
Article
ISSN
0947-5117

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Characterisation and corrosion of spot w
Characterisation and corrosion of spot welds of austenitic stainless steels
✍ M. Somervuori; L.-S. Johansson; M. H. Heinonen; D. H. D. van Hoecke; N. Akdut; H 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 German ⚖ 823 KB

## Abstract The corrosion resistance of spot‐welded and induction‐heated austenitic stainless steels EN 1.4301 and EN 1.4318 was investigated in 3.5% sodium chloride solution at ambient temperature. In potentiostatic measurements pitting corrosion of spot‐welded and induction‐heated samples occurs

Corrosion Books: Casti Handbook of Stain
Corrosion Books: Casti Handbook of Stainless Steels & Nickel Alloys. By: S. Lamb
✍ A. Burkert 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 German ⚖ 45 KB

On-Line Bookstore: www.ameritech.co.uk Das vorliegende Buch ist eine Sammlung von Informationen u ¨ber hochlegierte Sta ¨hle und Nickelbasislegierungen. Der Leser findet umfangreiche Ausfu ¨hrungen zur Einteilung und Kennzeichnung der genannten Legierungen sowie deren Eigenschaften und Einsatzmo ¨gl

Corrosion fatigue of spot-welded austeni
Corrosion fatigue of spot-welded austenitic stainless steels in 3.5% NaCl solution
✍ M. E. Somervuori; M. T. Alenius; H. E. Hänninen; R. Karppi 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 German ⚖ 611 KB

## Abstract Corrosion fatigue and fatigue properties of spot‐welded austenitic stainless steels EN 1.4301 and EN 1.4318 in 2B or 2F and 2H conditions were investigated in 3.5% sodium chloride (NaCl) solution and in air. The shear‐loaded specimens were single spot overlap joints. The effect of stee

Corrosion fatigue of weld-bonded austeni
Corrosion fatigue of weld-bonded austenitic stainless steels in 3.5% NaCl solution
✍ M. E. Somervuori; M. T. Alenius; T. Kosonen; R. Karppi; H. E. Hänninen 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 German ⚖ 379 KB 👁 1 views

## Abstract Corrosion fatigue and fatigue properties of weld‐bonded and spot‐welded austenitic stainless steels EN 1.4301 and EN 1.4318 in 2B or 2F and 2H conditions were investigated. The corrosive environment was 3.5% NaCl solution at + 50 °C. In air the fatigue strengths of the weld‐bonded singl

Determination of upper Boundary pitting
Determination of upper Boundary pitting resistance potential values for austenitic stainless steels under corrosion fatigue
✍ P. Eskelinen; O. Forsén; H. Spähn; S. Yläsaari 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 German ⚖ 616 KB

## Abstract In this study Mode IV‐corrosion fatigue (CF) characterized by additional superposition of pitting corrosion was investigated. Corrosion fatigue and polarization experiments were carried out on three austenitic (17Cr–13Ni–5Mo–0.15N, 25Ni–20Cr–5Mo–1.5Cu and 18Cr–10Ni–2Mo–0.5Ti) stainless