✦ LIBER ✦

Corrosion Behaviour of Stainless Steel Plates in PEMFC Working Conditions

✍ Scribed by A. Agneaux; M. H. Plouzennec; L. Antoni; J. Granier

Publisher: John Wiley and Sons
Year: 2006
Tongue: English
Weight: 203 KB
Volume: 6
Category: Article
ISSN: 1615-6846
DOI: 10.1002/fuce.200500100

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

Stainless steels commonly used as bipolar plates in PEMFC may corrode and produce metallic ions in anodic and cathodic media. In order to avoid or to limit as low as possible these pollutions, which reduce the fuel cell efficiency, studies are performed to understand occurring phenomena. The characterizations of the different stainless steels behaviour are obtained by means of electrochemical techniques in synthetic solutions representative of anodic and cathodic media.

📜 SIMILAR VOLUMES

In vitro corrosion fatigue of 316L cold

In vitro corrosion fatigue of 316L cold worked stainless steel

✍ Taira, Masayuki ;Lautenschlager, Eugene P. 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 English ⚖ 468 KB 👁 1 views

Corrosion Behaviour of Stainless Steel A

Corrosion Behaviour of Stainless Steel Alloys in Molten (Na,K)NO3 Eutectic Mixture

✍ A. A. Attia; Abdel-Hakim Ali; A. N. A. Masri; A. M. Baraka 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 186 KB 👁 1 views

Pitting and crevice corrosion behaviour

Pitting and crevice corrosion behaviour of high alloy stainless steels in chloride-fluoride solutions

✍ A. Pardo; M. C. Merino; E. Otero; M. D. López; M. V. Utrilla 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 German ⚖ 310 KB 👁 1 views

The localised corrosion resistance (pitting and crevice corrosion) of two high alloy stainless steels, namely superduplex (SD) and superaustenitic (SA), has been studied in chloride-fluoride solutions at pH values ranging from 2 to 6.5. The pitting potential (E pit ) and crevice potential (E cre ) h

Performance of galvanized and stainless

Performance of galvanized and stainless steel rebars in concrete under macrocell corrosion conditions

✍ V. Saraswathy; Ha-Won Song 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 German ⚖ 227 KB 👁 1 views

In the recent past, the damage caused by rebar corrosion in concrete structures has been considered as one of the major durability problems affecting the service life of concrete structures. In order to prevent corrosion of steel reinforcement, various types of protective methods have been adopted.

Corrosion behaviour of glass-bead blaste

Corrosion behaviour of glass-bead blasted stainless steel sheets and other sheets with dull surface finish in a chloride solution

✍ M. Faller; St. Buzzi; O. v. Trzebiatowski 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 German ⚖ 252 KB 👁 1 views

Glass-bead blasted stainless steel sheets are used in recent time for many applications in architecture or design of machines. If chloride can be accumulated on the surface, glass-bead blasted stainless steel show a worse corrosion behaviour than ground stainless steel. The corrosion behaviour of gl

Abstract of the PhD thesis “Corrosion be

Abstract of the PhD thesis “Corrosion behaviour of stainless steels and nickel alloys in hot concentrated static and flowing sulphuric acid and flowing sulphuric acid”

✍ Dr. Michael H. W. Renner 📂 Article 📅 1994 🏛 John Wiley and Sons 🌐 German ⚖ 97 KB 👁 1 views