𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Controlled Rate Thermogravimetry: New usefulness of controlled rate thermogravimetry revealed by decomposition of polyimide

✍ Scribed by T. Ozawa

Book ID
110287126
Publisher
Springer Netherlands
Year
2000
Tongue
English
Weight
100 KB
Volume
59
Category
Article
ISSN
0022-5215

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Influences of product gases on the kinet
Influences of product gases on the kinetics of thermal decomposition of synthetic malachite evaluated by controlled rate evolved gas analysis coupled with thermogravimetry
✍ Nobuyoshi Koga; Shuto Yamada πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 English βš– 199 KB

## Abstract An instrument of controlled rate evolved gas analysis (CREGA) coupled with TG‐DTA was constructed for analyzing the influences of product gases on the kinetics and mechanism of the thermal decomposition of solids that produce more than one gaseous products at the same stage of reaction.

Decomposition rate control of PLLA plate
Decomposition rate control of PLLA plate by heat treatment
✍ Masafumi Nakagawa; Fumio Teraoka; Taiji Sohmura πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 467 KB

## Abstract It is difficult to control the decomposition rate and the mechanical property of scaffolds after forming the poly(L‐lactide) (PLLA) scaffolds. The purpose of this study is to control the decomposition rate and mechanical properties of the PLLA plate after forming. We carried out acceler

Controlled rate thermal analysis command
Controlled rate thermal analysis commanded by mass spectrometry for studying the kinetics of thermal decomposition of very stable solids
✍ L. A. PΓ©rez-Maqueda; J. M. Criado; F. J. Gotor πŸ“‚ Article πŸ“… 2002 πŸ› John Wiley and Sons 🌐 English βš– 161 KB

## Abstract A quadrupole mass spectrometer coupled to a thermobalance has been used to develop a controlled rate thermal analysis (CRTA) equipment. This instrument maintains constant the partial pressure of the gas generated in a solid–gas reaction during the entire process while recording the weig