not covered in any detail. This would presumably limit the temperature range of this device. The effect that temperature variations have on the pressure in the hydraulic circuit -when the pressure is locked in -is also not covered. This latter factor could cause very significant pressure variations.
Connection and joint piece for tubes
- Publisher
- Elsevier Science
- Year
- 2007
- Tongue
- English
- Weight
- 201 KB
- Volume
- 2007
- Category
- Article
- ISSN
- 1350-4789
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
Many investigations and practical experience show that most heat exchanger failures occur at the tube-to-tubesheet joints and that they are affected by the geometry of the tube and tubesheet, the manufacturing process and the operating conditions. This paper focuses on the effect of the expansion pr
This patent describes a device for use as part of a centrifuge for biological samples. It is designed to allow fluid passage into and out of individual chambers of the centrifuge and provide thorough emptying of the chambers. It uses what are described as face seals but from the limited detail provi
Tubes with an O-ring joint have been dc~scribed (I, 2) for protein hydrolyses in place of sealed tubes. This technique eliminates the sealing of tubes and their troublesome opening. Also tubes wit.11 O-ring joints may be used repeatedly. Previous O-ring joint aplxuxtus have been modified in several