✦ LIBER ✦

Comparison of the Bowen ratio-energy balance and stability-corrected aerodynamic methods for measurement of evapotranspiration

✍ Scribed by E. Malek

Publisher: Springer
Year: 1993
Tongue: English
Weight: 769 KB
Volume: 48
Category: Article
ISSN: 1434-4483
DOI: 10.1007/bf00864923

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Continuous measurement of aerodynamic an

Continuous measurement of aerodynamic and alfalfa canopy resistances using the Bowen ratio-energy balance and Penman-Monteith methods

✍ Esmaiel Malek; Gail E. Bingham; Greg D. McCurdy 📂 Article 📅 1992 🏛 Springer 🌐 English ⚖ 388 KB

To investigate the alfalfa crop response to environmental factors, a Bowen ratio-energy balance method was used to evaluate short-term alfalfa canopy resistance. Continuous evapotranspiration (ET,) and the aerodynamic resistance (rJ for an alfalfa crop in each 20-min interval were calculated. Using

A Comparison of Extreme Energy Filtering

A Comparison of Extreme Energy Filtering and High Mass Resolution Techniques for the Measurement of 34S/32S Ratios by Ion Microprobe

✍ Lee R. Riciputi 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 590 KB

The precision and accuracy of "S/"S ratio measurements in sulfides by ion microprobe is compared using two different techniques, high mass resolution and extreme energy filtering. Our results indicate that the extreme energy filtering technique is more robust, yielding both better precision and accu

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB