Compact ridged-waveguide bandpass filters and diplexers
✍ Scribed by Aleksandr Shelkovnikov; George Goussetis; Djuradj Budimir
- Publisher
- John Wiley and Sons
- Year
- 2004
- Tongue
- English
- Weight
- 81 KB
- Volume
- 41
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A ridged‐waveguide diplexer incorporating integrated compact ridged‐waveguide filters and a ridged‐waveguide T‐junction is presented. The compact size of the filter is achieved by integrating a bandpass periodic filter, and a low‐pass structure is used in order to suppress spurious responses. Simulation using the mode‐matching method has been carried out for ridged‐waveguide filters and T junctions and the results are presented. The measured results are in good agreement with the simulated results. © 2004 Wiley Periodicals, Inc. Microwave Opt Technol Lett 41: 465–467, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.20173
📜 SIMILAR VOLUMES
The paper presents the internal details of a developed full-wave algorithm for the computer-aided design of evanescent-mode bandpass filters formed by single-or doubleshort ridged waveguide sections. New filter configurations with an enlarged cross section of filter housing and nonconventional notch
## Abstract A compact coplanar waveguide (CPW) band‐pass filter using a cross‐coupled λ/4 resonator with loaded split‐ring resonators (SRRs) is introduced in this letter. The proposed filter exhibits a quasi‐elliptic function response and its circuit size occupies only 12 × 11.8 mm^2^ (≈0.21λ~g~ ×
## Abstract With the rapid development of wireless communications, sharp rejection, and wide stopband are very important issues for filter applications. In this paper, a novel compact coplanar‐waveguide bandpass filter (CPW–BPF) is designed and implemented on commercial substrate. This filter at ce
of 0.9 GHz are 1.35 and 1.37 dBi, respectively. The simulated and measured gains at the frequency of 1.75 GHz are 3.71 and 3.84 dBi, respectively. The proposed antenna has relatively high gains, while the thickness of the antenna element is decreased. ## 4. CONCLUSION A newly compact and cable-fed
## Abstract The following article from __Microwave and Optical Technology Letters__, Volume 52, Issue 2, **"Neural modeling for compact coplanar waveguide bandpass filter loaded split ring resonator"** by Haiwen Liu, published online on December 8, 2009 in Wiley InterScience (www.interscience.wiley