## Abstract In this paper, a novel compact printed monopole antenna with multiband operation for wireless local area networks (WLAN) is presented. A simple C‐shaped strip and a straight strip of this antenna provide two resonant paths to achieve 2.4‐, 5.2‐, and 5.8‐GHz multiband operation. Good sim
Compact monopole antenna design for WLAN/UWB applications
✍ Scribed by Wen-Tsan Chung; Ching-Her Lee; Chow-Yen-Desmond Sim
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 594 KB
- Volume
- 51
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
This article presents a compact microstrip‐fed monopole antenna for application in WLAN (2.4–2.484 GHz) and UWB (3.1–10.6 GHz) bands. The radiating element of the proposed antenna consists of two arms that resonate at the fundamental frequencies of 2.45 and 3.5 GHz. A narrow slot is purposely embedded in the ground plane under the microstrip feed line to improve the impedance matching for the higher‐order modes of the two radiating arms for achieving an ultra‐wide‐band response. A prototype of the designed antenna is fabricated and measured, and satisfactory radiation properties were observed. The measured 10‐dB return‐loss bandwidth (maximum peak gain) of the 2.4‐GHz WLAN band is 0.17 GHz (4 dB), and that of the UWB band is 7.65 GHz (8.7 dB). In addition, a small group‐delay variation of less than 1 ns was observed in the UWB. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 2874–2878, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24759
📜 SIMILAR VOLUMES
## Abstract This article presents a compact printed monopole antenna for 3G and UWB mobile and wireless communication systems. The antenna consists on printed microstrip arms on a Rogers' substrate with a slotted partial ground plane. The size of the antenna is only 16 mm × 36 mm × 0.83 mm. The sim
## Abstract A novel printed meander monopole antenna for tri‐band wireless local area network (WLAN) applications is presented. The antenna is composed of a meander strip and a straight strip with a gap between the ends of them, both printed on an inexpensive FR4 substrate, and is fed by a 50 Ω mic
## Abstract A compact printed monopole antenna for WLAN and WiMAX applications is proposed. By combining symmetrical G‐shaped strips and a coupling‐fed plate, fed by a 50 Ω microstrip transmission line, wide impedance bandwidths covering WLAN/2.4/5.2 and WiMAX/5.75 are achieved. The omnidirectional
## Abstract Design and performance measures of a printed multistrip monopole antenna for ultra‐wideband application are presented. The proposed antenna consists of six quarter wavelength strips of different resonant frequency combined in a manner to provide wide bandwidth and omnidirectional patter
## Abstract A compact and simple monopole antenna with CPW‐fed structure is proposed for application in dual‐band WLAN systems. The proposed antenna, which resembles the shape of the letter “e”, has a compact size of only 27 × 18 × 1.6 mm^3^ including the ground. By fabricated and measured, the pro