Comments on the design of a band-pass electronic filter
✍ Scribed by W.E. Newell
- Publisher
- Elsevier Science
- Year
- 1964
- Weight
- 78 KB
- Volume
- 4
- Category
- Article
- ISSN
- 0020-0891
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract We proposed a compact microstrip band‐pass filter with wide stopband in this article.Microstrip gap and interdigital capacitor combine with stub inductors shorted to the ground plane by via were used to take advantage of different aspects of left‐handed behavior to achieve compact size
## Abstract In this article, a compact dual‐mode patch resonator for band‐pass filter applications is developed. The size reduction of the studied filter is simply achieved by etching a dual‐cross slot on the patch. Studies indicate that with this arrangement, the size can be reduced to 26.7% as co
## Abstract In this article, several square open‐loop resonators with transmission lines are proposed to design the optimized bandpass filters. A compact microstrip filter using an open‐loop resonator was designed, fabricated and measured. At the center frequency f~0~ = 1.80 GHz, a 3‐dB bandwidth o
## Abstract In this article, λ~g~/2 open stub bandpass filters with flexible narrow bandwidth on duroid substrate are presented. This filters show flexible bandwidth with variation of the position of the open stubs using the external quality factor, Q~e~ without changing the impedance value at micr
## Abstract In this paper, various planar printed microwave bandpass filters (BPFs) are designed and analyzed by applying a nonuniform finite‐difference time‐domain (NU‐FDTD) method. These filters, referred to as integrated‐circuit package filters (ICPFs), are designed in such a way that they opera