✦ LIBER ✦

Collinear printed array antenna

✍ Scribed by K. George Thomas; N. Lenin

Publisher: John Wiley and Sons
Year: 2008
Tongue: English
Weight: 148 KB
Volume: 50
Category: Article
ISSN: 0895-2477
DOI: 10.1002/mop.23423

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

A novel high gain printed dipole array antenna for omni directional coverage is presented. The dipoles are electromagnetically fed by planar slots, formed on a 50 Ω microstrip transmission line. The impedance characteristics and radiation patterns of the antenna are analyzed numerically with finite element method and compared with the measurement. The unbalanced feed point of the antenna is fed directly with a small co‐axial cable. The antenna demonstrates good impedance and pattern bandwidth of 300 MHz from 2.25–2.55 GHz and is suitable for ISM band/WLAN operation. The optimum impedance matching can be achieved by increasing the width of the 50 Ω line around the feed point and thereby altering feed point impedance. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 1582–1584, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23423

📜 SIMILAR VOLUMES

High-gain omnidirectional printed collin

High-gain omnidirectional printed collinear antenna

✍ Kin-Lu Wong; Ting-Chih Tseng; Fu-Ren Hsiao; Tsung-Wen Chiu 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 303 KB

A printed collinear antenna with a narrow (10 mm) width showing high-gain omnidirectional radiation is presented. The antenna comprises three half-wavelength elements of one strip dipole, one meandered line, and one straight strip connected in series, and has a total height of only 113.5 mm (about 9

A compact broadside/endfire printed arra

A compact broadside/endfire printed array antenna

✍ H. Matzner; G. Sasson; M. Yacobi; M. Haridim 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 474 KB

## Abstract A novel double‐layer patch array antenna is presented. The proposed antenna consists of two identical parallel layers, each containing five patch elements. The antenna is fed through one of the elements in the lower layer while other elements act as parasitic antenna elements. Both simu

CAD of printed antennas and arrays

✍ Hall, Peter S. ;Jackson, David R. 📂 Article 📅 1993 🏛 John Wiley and Sons 🌐 English ⚖ 345 KB

Printed collinear two-antenna element fo

Printed collinear two-antenna element for WLAN access points in a MIMO system

✍ Kin-Lu Wong; Jui-Hung Chou 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 181 KB

## Abstract A printed collinear two‐antenna element suitable for application in a wireless local area network (WLAN) access point in a multi‐input multi‐output (MIMO) system is presented. The printed element comprises one dipole antenna and one monopole antenna, both printed in a collinear configur

A novel suspended stripline-fed printed

A novel suspended stripline-fed printed square slot array antenna with high-gain

✍ Juntao He; Xing Chen; Kama Huang 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 180 KB 👁 1 views

A novel suspended stripline-fed square slot array antenna with high gain is presented. Its basic structure is a suspended stripline comprising of three layers. On the top layer, 4 3 4 square slots are etched and act as radiation elements. The middle layer consists of a suspended stripline power divi

Phased Array Antennas || Superdirective

Phased Array Antennas || Superdirective Arrays

✍ Hansen, R. C. 📂 Article 📅 2009 🏛 John Wiley & Sons, Inc. 🌐 English ⚖ 1006 KB

**An in-depth treatment of array phenomena and all aspects of phased array analysis and design** *Phased Array Antennas, Second Edition* is a comprehensive reference on the vastly evolving field of array antennas. The Second Edition continues to provide an in-depth evaluation of array phenomena wit