Exact explicit analytical expressions which give the natural frequencies and mode shapes of a bending}torsion coupled beam with cantilever end condition are derived by rigorous application of the symbolic computing package REDUCE. The expressions are surprisingly concise and very simple to use. By w
Clamped-clamped Natural Frequencies Of A Bending-torsion Coupled Beam
β Scribed by J.R. Banerjee; F.W. Williams
- Publisher
- Elsevier Science
- Year
- 1994
- Tongue
- English
- Weight
- 190 KB
- Volume
- 176
- Category
- Article
- ISSN
- 0022-460X
No coin nor oath required. For personal study only.
β¦ Synopsis
An elegant and accurate method for determining the number of clamped-clamped natural frequencies of a bending-torsion coupled beam which lie below a specified frequency is presented. The method facilitates an easy and straightforward application of the WittrickWilliams algorithm when finding natural frequencies of bending-torsion coupled beams, or structures which contain them. Numerical results are given for an illustrative example.
π SIMILAR VOLUMES
The response of a beam coupled in bending and torsion to deterministic and random loads is investigated by using the normal mode method. The loading on the beam may be either concentrated or distributed over its length. The deterministic load is assumed to be varying harmonically, whereas the random
Vibration problems of spinning shafts with attached disks occur quite frequently, but until recently the analyses were generally restricted to the Β―exible-shaft/rigid-disk models, which lost at least two-thirds of the vibrational characteristics to a certain extent. In the present paper, a substruct
Prediction of the natural frequencies of a rotating disk requires accurate representation of the disk membrane stresses caused by rotation. These stresses depend strongly on the membrane stress boundary condition at the clamping collar. This research evaluates experimentally the validity of the stan