✦ LIBER ✦

Characterization of polymer blends and alloys by constrained profile-analysis of X-ray diffraction scans

✍ Scribed by N. S. Murthy; H. Minor; M. K. Akkapeddi; B. Van Buskirk

Publisher: John Wiley and Sons
Year: 1990
Tongue: English
Weight: 388 KB
Volume: 41
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.1990.070410929

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Quantitative analysis of polymer blends

Quantitative analysis of polymer blends using breadths of overlapping x-ray diffraction lines

✍ P. K. Chidambareswaran; S. Sreenivasan; N. B. Patil; V. Sundaram 📂 Article 📅 1980 🏛 John Wiley and Sons 🌐 English ⚖ 312 KB 👁 1 views

X-Ray Diffraction (XRD), Differential Th

X-Ray Diffraction (XRD), Differential Thermal Analysis (DTA), and Scanning Electron Microscopy (SEM) of (CuInSe2)1?x (VSe)x Alloys (0 ?x ? 0.5)

✍ Grima Gallardo, P. ;Dur�n, S. ;Quintero, M. ;Mu�oz, M. ;Delgado, G. ;Brice�o, J. 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 144 KB 👁 2 views

Polycrystalline samples of (CuInSe 2 ) 1--x (VSe) x alloys have been prepared by the usual melt and anneal technique in the composition range 0 x 0.5. X-ray diffraction (XRD), differential thermal analysis (DTA) and scanning electron microscopy techniques were used to characterize the products. By S

XPS and x-ray diffraction characterizati

XPS and x-ray diffraction characterization of thin Co-Al-N alloy films prepared by reactive sputtering deposition

✍ Asami, K.; Ohnuma, S.; Masumoto, T. 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 368 KB 👁 2 views

## Thin (x = 0-30 at.% ) alloy Ðlms prepared by a reactive radio frequency (r.f.) sputtering (Co 0.8 Al 0.2 ) 100-x N x method were characterized by XPS and x-ray di †raction (XRD). The Ðlm with no nitrogen consisted of a CsCltype CoAl metallic compound, while the nitrogen-containing alloys were c

A Comparative Study of (Cu-III-Se2)x-(Fe

A Comparative Study of (Cu-III-Se2)x-(FeSe)1?x Alloys (III: Al, Ga, In) (0 ? x ? 1) by X-Ray Diffraction, Differential Thermal Analysis and Scanning Electron Microscopy

✍ Grima-Gallardo, P. ;C�rdenas, K. ;Molina, L. ;Quintero, M. ;Ruiz, J. ;Delgado, G 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 202 KB 👁 2 views

The effect of high pressure processing o

The effect of high pressure processing on the morphology of polyethylene films tested by differential scanning calorimetry and X-ray diffraction and its influence on the permeability of the polymer

✍ Seungran Yoo; Jaesung Lee; Christopher Holloman; Melvin A. Pascall 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 172 KB 👁 2 views

## Abstract This study investigated the influence of high‐pressure processing on the morphology and permeability of low‐density polyethylene (LDPE) films used for food packaging. This was done by monitoring the crystallinity, melting temperature (__T__~__m__~), and oxygen transmission rate (OTR) of

A study of the morphology of polyurethan

A study of the morphology of polyurethane–polystyrene interpenetrating polymer networks by means of small angle X-ray scattering, modulated-temperature differential scanning calorimetry, and dynamic mechanical thermal analysis techniques

✍ Mo Song; Douglas J. Hourston; Franz U. Schafer 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 150 KB 👁 2 views