Abstract
The applicability of parylene C as an encapsulation material for implanted neural prostheses was characterized and optimized. The adhesion of parylene C was tested on different substrate materials, which were commonly used in neural prostheses and the efficiency of different adhesion promotion methods was investigated. On Si~3~N~4~, platinum, and on a first film of parylene C, a satisfactory adhesion was achieved with Silane Aβ174, which even withstood standard steam sterilization. The adhesion to gold and polyimide could not be improved sufficiently with the tested methods. Furthermore, tensile tests and measurements of the degree of crystallinity were performed on untreated, on steam sterilized, and on annealed parylene C layers to investigate the influence of thermal treatment. This led to more brittle and stiffer films due to an increase in the crystalline portion in the parylene layers. Finally, an electrochemical impedance spectroscopy was used to test if a parylene C layer was able to protect a metallic structure against corrosion on a Si~3~N~4~ substrate. The results indicated that this could be only possible by treating the substrate with Silane Aβ174. To receive parylene C layers with a good encapsulation performance, it is important to consider the materials, which are used in the neural prosthesis, to find the best suited process parameters. Β© 2010 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2010