𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Characterization of Microstructure and Mechanical Properties of TiNbZr Alloy during Heat Treatment

✍ Scribed by Wang Liqiang; Yang Guanjun; Yang Huabin; Cao Jimin; Lü Weijie; Zhang Di

Publisher
Elsevier
Year
2009
Weight
456 KB
Volume
38
Category
Article
ISSN
1875-5372

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microstructure and Mechanical Properties
Microstructure and Mechanical Properties of TiNbZr Alloy during Cold Drawing
✍ Wang Liqiang; Yang Guanjun; Yang Huabin; Cao Jimin; Lü Weijie; Zhang Di 📂 Article 📅 2009 🏛 Elsevier ⚖ 668 KB

The cold workability of solution-treated TiNbZr biomedical β titanium alloy was investigated. TiNbZr alloy was fabricated by vacuum consumable arc melting furnace. Cold drawing was carried out for further deformation of the studied alloy. During cold drawing, the alloy exhibited excellent workabili

Influence of heat treatment on microstru
Influence of heat treatment on microstructure and mechanical properties of iron-based coating
✍ Li Hua-yi; Li Guo-lu; Wang Hai-dou; Xu Bin-shi 📂 Article 📅 2011 🏛 Elsevier Science ⚖ 649 KB

Iron-based alloys were deposited on the low carbon steel by plasma cladding process. Furnace annealing was conducted at 600 °C for 40 min. Resulting microstructure and phases were observed and investigated by scanning electron microscopy (SEM), energy-dispersive spectrometer (EDS) and X-ray diffract

Microstructure and mechanical properties
Microstructure and mechanical properties of spray deposited and extruded/heat treated hypoeutectic Al–Si alloy
✍ L.A. Bereta; C.F. Ferrarini; C.S. Kiminami; W.J.F. Botta; C. Bolfarini 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 458 KB

The microstructure and the tensile properties of an Al-8.9 wt.% Si-3.2 wt.% Cu-0.9 wt.% Fe-0.8% Zn alloy processed by spray forming was investigated. The porosity level, the conditions of the heat treatment applied and the presence/addition of certain alloying elements to this alloy is known to grea