✦ LIBER ✦

Microstructure and mechanical properties of an Al–12.7Si–0.7Mg alloy processed by extrusion and heat treatment

✍ Scribed by Fang Liu; Fuxiao Yu; Dazhi Zhao; Liang Zuo

Publisher: Elsevier Science
Year: 2011
Tongue: English
Weight: 881 KB
Volume: 528
Category: Article
ISSN: 0921-5093
DOI: 10.1016/j.msea.2011.01.041

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of modification treatment on the

Effect of modification treatment on the microstructure and mechanical properties of Al–0.35%Mg–7.0%Si cast alloy

✍ X.H. Zhang; G.C. Su; C.W. Ju; W.C. Wang; W.L. Yan 📂 Article 📅 2010 🏛 Elsevier Science ⚖ 662 KB

Effects of heat treatment on microstruct

Effects of heat treatment on microstructure and mechanical properties of twin roll casted Al–5.5Mg–0.02Ti alloy

✍ Sanjeev Das; N.S. Lim; H.W. Kim; C.G. Park 📂 Article 📅 2010 🏛 Elsevier Science ⚖ 768 KB

Microstructure and Mechanical Properties

Microstructure and Mechanical Properties of Directionally Solidified Nb-22Ti-16Si-7Cr-3Al-3Ta-2Hf-0.1Ho Alloy

✍ Y. Tian; G. Cheng; J. Guo; L. Zhou; L. He; H. Ye 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 786 KB

Microstructure and tensile properties of

Microstructure and tensile properties of Al–Mn alloy processed by accumulative roll bonding

✍ Kun Xia Wei; Wei Wei; Qing Bo Du; Jing Hu 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 954 KB

Microstructure and tensile properties of ultrafine grained Al-Mn alloy by ARB at room temperature were investigated. With the cycles of ARB, the average grain size becomes smaller, and the pancake shaped ultrafine grains develop to be about 250 nm after five cycles. Meanwhile, the MnAl 6 phase in th

Microstructure and mechanical properties

Microstructure and mechanical properties of SPD-processed an as-cast AZ91D+Y magnesium alloy by equal channel angular extrusion and multi-axial forging

✍ Zude Zhao; Qiang Chen; Chuankai Hu; Dayu Shu 📂 Article 📅 2009 🏛 Elsevier Science ⚖ 755 KB

Microstructure and mechanical properties

Microstructure and mechanical properties of spray deposited and extruded/heat treated hypoeutectic Al–Si alloy

✍ L.A. Bereta; C.F. Ferrarini; C.S. Kiminami; W.J.F. Botta; C. Bolfarini 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 458 KB

The microstructure and the tensile properties of an Al-8.9 wt.% Si-3.2 wt.% Cu-0.9 wt.% Fe-0.8% Zn alloy processed by spray forming was investigated. The porosity level, the conditions of the heat treatment applied and the presence/addition of certain alloying elements to this alloy is known to grea