𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Characterization of carbon-carbon composites—II: Oxidation behaviour

✍ Scribed by P. Ehrburger; J. Lahaye; C. Bourgeois

Publisher
Elsevier Science
Year
1981
Tongue
English
Weight
558 KB
Volume
19
Category
Article
ISSN
0008-6223

No coin nor oath required. For personal study only.

✦ Synopsis

Carbon-carbon composites made from ex-acrylic fibres and pyrocarbon matrices have been gasified in air in order to investigate their resistance to oxidation. The carbon fibres and the surrounding pyrocarbon layers are preferentially oxidized due to a catalytic process. The importance of the catalytic phenomenon depends primarly on the heat treatment of the composites. Lowest oxidation rates are obtained after heat treatment at 2900K. Oxidation tests allow a simple evaluation of the carbon-carbon composites performance at the laboratory scale.

📜 SIMILAR VOLUMES

Oxidation behavior of carbon-carbon comp
Oxidation behavior of carbon-carbon composites
✍ Chang Heh-Won; Robert M. Rusnak 📂 Article 📅 1979 🏛 Elsevier Science 🌐 English ⚖ 426 KB

This study investigates the oxidation mechanisms of carbon-carbon composite materials of the type used for aircraft brakes. The rate-controlling steps for oxidation at temperatures ranging between 450 and 750°C were determined by measuring activation energies of composite samples in bulk form and in

Contribution of oxidation to the wear of
Contribution of oxidation to the wear of carbon-carbon composites
✍ H.W. Chang; R.M. Rusnak 📂 Article 📅 1978 🏛 Elsevier Science 🌐 English ⚖ 340 KB

An investigation was made of the effects of oxidation on the wear of carbon-carbon composites for aircraft brake materials. Wear tests were performed on samples under various oxygen partial pressures, and measurements were made of wear rates in weight and thickness. Wear rate was found to increase w

Inhibition of the oxidation of carbon-ca
Inhibition of the oxidation of carbon-carbon composites by bromination
✍ C.T. Ho; D.D.L. chung 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 948 KB

Bromination by exposure to bromine vapor at room temperature was effective for inhibiting the oxidation of carbon-carbon composites in the form of PAN-based carbon fibers impregnated with resin. which was subsequently carbonized at 1000 or 2000°C. The oxidation rate was decreased by up to 43%. In ad

131. Oxidation of carbon fibre/carbon co
131. Oxidation of carbon fibre/carbon composite
✍ S. Kimura; Y. Shibusa; H. Tanaka; E. Yasuda 📂 Article 📅 1976 🏛 Elsevier Science 🌐 English ⚖ 126 KB

strains (about 2%) have been prepared and high perforreported for this graphitization that glassy carbon (GC) mance carbon fiber reinforced composites (CFRP) were constituting the matrix possibly changed to graphite due obtained using these fibers. The fibers have been prepared to the internal stres

Borate treatment of carbon fibers and ca
Borate treatment of carbon fibers and carbon/carbon composites for improved oxidation resistance
✍ D.W. McKee 📂 Article 📅 1986 🏛 Elsevier Science 🌐 English ⚖ 476 KB

## Carbon fibers and carbon/carbon composites have been treated with borate additives and then cured at 500-600°C to produce a continuous film of boron oxide on all exposed surfaces.This treatment has been found to be highly effective in retarding oxidation of the carbonaceous substrate for exten