Figure 10 Magnitude of the electric current on an unmitered 45Π bend discontinuity w x agreement with those presented in 8 . A traveling-wave configuration is also obtained for the electric surface current Ε½ . distribution shown in Figure 10 before the numerically matched load. ## IV. CONCLUSION I
Characteristics of a cylindrical triangular microstrip antenna
β Scribed by Shan-Cheng Pan; Kin-Lu Wong
- Publisher
- John Wiley and Sons
- Year
- 1997
- Tongue
- English
- Weight
- 171 KB
- Volume
- 15
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
β¦ Synopsis
Characteristics of a probe-fed triangular microstrip patch antenna mounted on a cylindrical body are studied with the use of a full-wa¨e approach. Theoretical formulation of the input impedance and radiation pattern of the antenna is described. Numerical results are calculated and discussed. Good agreement between theory and experiment is also obser¨ed.
π SIMILAR VOLUMES
An amplifier-type acti¨e microstrip antenna, as a transmitting antenna, consisting of a passi¨e broadband slotted triangular microstrip antenna and a coplanar amplifier circuitry for enhanced gain and bandwidth, is demonstrated. The acti¨e microstrip antenna studied ( here is printed on an inexpensi
## Abstract The characteristics of a bowβshaped microstrip patch antenna are analyzed and compared with a conventional rectangular microstrip antenna. The various parameters such as return loss, gain, and VSWR are determined and compared. It is found that the center frequency of the bowβshaped ante
Note that denotes the two-dimensional inverse 2 of the s, t t Ε½ . planar dyadic . The solution of 71 can now be written s, t t as Ε½ . Ε½ . F
The radiation chamcteristics of a parabolic cylindrical refictor antenna fed by a linear microstrip patch array operated at fi band are studied. CaLiiy model and physical optics approximations are used to analyze the patch array and the induced currents on the reflector surface, respectively. Radiat