𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Carbon/carbon composites prepared by chemical vapor infiltration—15 years later

✍ Scribed by S. Marinković

Publisher
Elsevier Science
Year
1991
Tongue
English
Weight
597 KB
Volume
29
Category
Article
ISSN
0008-6223

No coin nor oath required. For personal study only.

✦ Synopsis

Early work on preparing carbon-carbon composites by using chemical vapor infiltration is discussed. Later work showed little influence of substrate on infiltration kinetics. and confirmed earlier relationships between property values and density. Yields of total carbon, soot, and CVD carbon are explained using different collision efficiencies of gas phase constitutents.

📜 SIMILAR VOLUMES

Densification of carbon/carbon composite
Densification of carbon/carbon composites by pulse chemical vapor infiltration
✍ Hyeok Je Jeong; Hee Dong Park; Jae Do Lee; Jong Ook Park 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 508 KB

Two-dimensional carbon/carbon composites were densified with carbon by pyrolysis of propane using the pulse chemical vapor infiltration (CVI) process which repeats the cycle of evacuation and introduction of gas. The experimental parameters were deposition temperature, reactant gas concentration, fl

Failure behavior of carbon/carbon compos
Failure behavior of carbon/carbon composites prepared by chemical vapor deposition
✍ K.Y. Sohn; Oh Seh-Min; Lee Jai-Young 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 878 KB

## Abstrad-Tensile tests have been performed on carbon/carbon composites made from carbon cloths and a pyrolytic carbon matrix and their failure surfaces were examined by scanning electron microscopy. The load-extension curves are characterized by three distinct regions: the applied load needed to

Modeling of chemical vapor infiltration
Modeling of chemical vapor infiltration of carbon composites with pyrolytic carbon
✍ P. McAllister; E.E. Wolf 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 492 KB

An analysis of the reaction and diffusion of gases occurring simuitaneously with deposition of carbon in a porous material is presented. The model incorporates a scheme for the formation of carbon during the pyrolysis of a gaseous hydrocarbon to yield predictions for concentration and porosity profi

Carbon/carbon composites prepared by che
Carbon/carbon composites prepared by chemical vapour deposition
✍ S. Marinković; S. Dimitruević 📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 921 KB

This paper summarizes the results of the authors' work on C/C composites prepared by chemical vapour deposition (CVD), using propylene as a source of carbon and various substrates (cellulose carbon, natural graphite, different grades of carbon fibres bonded by phenolic or CVD carbon). The equations

Carbon/carbon processing by forced flow-
Carbon/carbon processing by forced flow-thermal gradient chemical vapor infiltration (FCVI) using propane
✍ S. Vaidyaraman; W.J. Lackey; P.K. Agrawal 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 747 KB

A 23 factorial statistically designed experiment was used to study fabrication of carbon/carbon composites using the forced flow-thermal gradient chemical vapor infiltration process. Propane, diluted with hydrogen, was used as the feed. The independent variables were the temperature of the bottom of

Electrical Response to Organic Vapor of
Electrical Response to Organic Vapor of Conductive Composites from Amorphous Polymer/Carbon Black Prepared by Polymerization Filling
✍ Jun Rong Li; Jia Rui Xu; Ming Qiu Zhang; Min Zhi Rong 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 108 KB

## Abstract In recent years, conductive polymer composites have found applications as gas sensors because of their sudden change in electric resistance of several orders of magnitude when the materials are exposed to certain solvent vapors. However, the composites having this function reported so f