✦ LIBER ✦

Car window seal

Publisher: Elsevier Science
Year: 2010
Tongue: English
Weight: 159 KB
Volume: 2010
Category: Article
ISSN: 1350-4789
DOI: 10.1016/s1350-4789(10)70216-6

No coin nor oath required. For personal study only.

✦ Synopsis

PATENTS

differential unit. The setting of the joint with shims will cause variable loading on a conventional O-ring or gasket. The gasket has tubular sections which align with the oil-feed passages in the components of the axle. The flange of the gasket (43) can have a thickness, and compressibility characteristics, selected such that pressure applied to the flange is greater than pressure applied to the shim, but this condition may be reversed.

📜 SIMILAR VOLUMES

Window seal

📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 160 KB

A thermoplastic elastomer material for the manufacture of seals in pharmaceutical dispensing devices is described. It is formed from a blend including a propylene component with isotactic crystallinity; and one or more polymer of polypropylene, polyethylene or their copolymers.

Car side window kinematics

✍ A. Gfrerrer; J. Lang; A. Harrich; M. Hirz; J. Mayr 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 992 KB

It is a demanding and time-consuming task to construct the side window mechanism of a car such that the deflections along the seals are minimized. The reason for this is that the window surface S delivered by the stylist, will in general not be movable in a proper way: It is required that the surfac

Optical probe window seal

📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 84 KB

This patent describes a pump for liquid chromatography applications. It is specifically designed to operate without lubricants that could cause contamination of the samples. The seals described are designed to run without lubricant and prevent cross contamination of samples. They are spring energise

Composite seal and window assembly

📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 223 KB

Seal for motor vehicle window

📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 204 KB

Seal for holes in car bodies

📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 202 KB

Cross-section of the mechanical seal with pressurized feed to the seal face described in WO 2006/051702, and a detail of the annular face grooves.