In this letter, we propose a new concept for a self-switched time shifter. The structure is theoretically in¨estigated by means of an analytical approach and computer simulation. The electrical performances of the proposed configuration are compared with those of a con¨entional single-pole double-th
Broadband fixed phase shifter for C-band applications
✍ Scribed by A. M. Abbosh
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 388 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
The design of a fixed phase shifter for C‐band applications is presented. The proposed device is composed of two parts: a quadrature 3‐dB directional coupler and the Wilkinson combiner. The quadrature coupler used in the proposed phase shifter is based on the edge‐coupled microstrip lines with a slotted ground plane to make the gap required between the coupled lines feasible. The simulated and measured results of the phase shifter show a 45° ± 5° fixed phase shift across the band 4–8 GHz with less than 1‐dB insertion loss and better than 12‐dB return loss at the centre of the C‐band. The designed device also shows a flat group delay, which enables its use in a narrow pulse transmission/reception and in the high data rate systems. The designed phase shifter has a compact size with dimensions of 30 mm × 30 mm. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 396–399, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23133
📜 SIMILAR VOLUMES
## Abstract The possible design of phase shifters with reduced frequency dispersion using combined sections of forward‐wave (FW) and backward‐wave (BW) transmission lines is discussed. It is shown that inclusion of backward‐wave sections into a transmission line always increases the total dispersio
## Abstract A broadband microstrip patch antenna fed by slot coupling is described. The operation frequencies are in the __E__‐band, and the required bandwidth is about 2 GHz. Results obtained from an antenna design to operate from 40.5 to 42.5 GHz are presented. © 2001 John Wiley & Sons, Inc. Micr
## Abstract This article proposes a reflection‐type wideband 360° analogue phase shifter in microstrip form. It employs a 3‐dB branch‐line coupler circuit to achieve a wideband operation and two varactor‐diode circuits to achieve 360° phase shift. Formulas are derived to optimize the dimensions of
## Abstract A broadband monolithic single‐ended active frequency doubler fed by a single positive DC power supply is presented. The effects of the self‐bias approach on the doubler performances are investigated and a design method is proposed. Measured performances demonstrate the competitiveness o
## Abstract A broadband printed monopole antenna is proposed for digital communication systems (DCS‐1800), personal communication services (PCS1900), and international mobile telecommunication (IMT‐2000) tri‐band mobile devices. The proposed antenna is composed of two inverted L‐shaped monopoles, a