✦ LIBER ✦

Brillouin fiber laser with a 49 cm long Bismuth-based erbium-doped fiber

✍ Scribed by S. W. Harun; S. Shahi; H. Ahmad

Publisher: John Wiley and Sons
Year: 2010
Tongue: English
Weight: 68 KB
Volume: 7
Category: Article
ISSN: 1612-2011
DOI: 10.1002/lapl.200910101

No coin nor oath required. For personal study only.

✦ Synopsis

Brillouin fiber laser (BFL) has been demonstrated using a 49 cm long bismuth-based erbium-doped fiber (Bi-EDF) in conjunction with a 20 m long photonic crystal fiber as gain media with a simple ring resonator. The BFL operates at 1559.09 nm, which is 0.09 nm shifted from the Brillouin pump wavelength. The BFL also has a stable output with a side mode suppression ratio of 12 dB.

Output power, dBm

📜 SIMILAR VOLUMES

Multi-wavelength Brillouin fiber laser u

Multi-wavelength Brillouin fiber laser using a holey fiber and a bismuth-oxide based erbium-doped fiber

✍ S. Shahi; S.W. Harun; H. Ahmad 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 102 KB

Multi-wavelength Brillouin fiber laser (BFL) is demonstrated using a holey fiber and a Bismuth-oxide based erbium-doped fiber (Bi-EDF) in a simple ring resonator. The proposed BFL is able to generate up to 13 lines including anti-Stokes with a channel spacing of 0.08 nm at the 1574 nm region. The mu

67 cm long bismuth-based erbium doped fi

67 cm long bismuth-based erbium doped fiber amplifier with wideband operation

✍ X.S. Cheng; B.A. Hamida; A.W. Naji; H. Ahmad; S.W. Harun 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 83 KB

In this paper, we demonstrate a wideband Bismuthbased erbium doped fiber amplifier (Bi-EDFA) using two pieces of bismuth-based erbium-doped fiber (Bi-EDF) with a total length of 67 cm as gain media in a double pass parallel configuration. Both Bi-EDFs have an erbium ion concentration of 6300 ppm. Co

Multiwavelength erbium-doped fiber ring

Multiwavelength erbium-doped fiber ring laser based on a fiber Sagnac loop filter

✍ Y. Liu; D. Liu; H. Wang 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 268 KB

## Abstract We propose and experimentally demonstrate a multiwavelength erbium‐doped fiber ring laser using a fiber Sagnac loop filter. The fiber Sagnac loop filter served as the wavelength selection component within the ring laser cavity. By carefully tuning the setting of the polarization control

Multi-wavelength erbium-doped fiber lase

Multi-wavelength erbium-doped fiber laser based on a microstructure fiber Bragg grating

✍ Tingting Sun; Guiyun Kai; Zhi Wang; Chao Wang; Chunshu Zhang; Yange Liu; Jianfei 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 85 KB

In this paper, a multiwavelength erbium-doped fiber laser based on a microstructure fiber Bragg grating (FBG) is proposed and demonstrated. The fiber Bragg grating is fabricated in a large-air-hole microstructure optical fiber using the phase-mask method. The laser based on this novel grating can be

Double-clad erbium/ytterbium-doped fiber

Double-clad erbium/ytterbium-doped fiber laser with a fiber Bragg grating

✍ M.R.A. Moghaddam; S.W. Harun; M.R. Tamjis; H. Ahmad 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 77 KB

A double-clad erbium/ytterbium-doped fiber laser (EYDFL) is demonstrated using a fiber Bragg grating (FBG) as wavelength selective filter in a linear cavity resonator. The effect of the FBG's wavelength on the performance of the EYDFL is also investigated. The slope efficiencies of the EYDFL are obt

Mode-locked bismuth-based erbium-doped f

Mode-locked bismuth-based erbium-doped fiber laser with stable and clean femtosecond pulses output

✍ S.W. Harun; R. Akbari; H. Arof; H. Ahmad 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 190 KB

A passively mode-locked fiber ring laser is demonstrated using a 49 cm long bismuth oxide based erbium-doped fiber (Bi-EDF) and a fast semiconductor saturable absorber. Stable and clean short pulses are achieved because of these short and high nonlinear characteristics of the Bi-EDF. The laser opera