The cross-correlation function between two response measurements made on an ambiently excited structure is shown to have the same form as the system's impulse response function. Therefore, standard time domain curve-fitting procedures, which are typically applied to impulse response functions, can n
Bridge health monitoring system based on vibration measurements
โ Scribed by Evaggelos Ntotsios; Costas Papadimitriou; Panagiotis Panetsos; Grigorios Karaiskos; Kyriakos Perros; Philip C. Perdikaris
- Publisher
- Springer
- Year
- 2008
- Tongue
- English
- Weight
- 316 KB
- Volume
- 7
- Category
- Article
- ISSN
- 1570-761X
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
A vibration based damage identification method is investigated experimentally for a 2.5-dimensional composite structure. The dynamic response of an intact and a locally delaminated 16-layer unidirectional carbon fibre PEKK reinforced T-beam is considered. A force-vibration set-up, including a laser
From 1973 to 1974 in Germany a cable-stayed highway bridge across the River Rhine near Speyer was under construction. During this stage the pylon and the projecting part of the bridge were endangered by wind-induced oscillations. For the pylon without cables, wind tunnel tests were carried out in o