Recently described organic-inorganic nanocomposite coatings of the chemical composition: (PLL/PGA) 10 -CaP[(PLL/PGA) 5 CaP] 4 (coating A) and (PLL/PGA) 10 CaP[(PLL/ PGA) 5 CaP] 4 (PLL/PGA) 5 (coating B), applied to chemically etched titanium plates, have been tested by extensive cell culture tests a
Biomimetic organic–inorganic nanocomposite coatings for titanium implants
✍ Scribed by Maja Dutour Sikirić; Csilla Gergely; Rene Elkaim; Ellen Wachtel; Frederic J. G. Cuisinier; Helga Füredi-Milhofer
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 1009 KB
- Volume
- 89A
- Category
- Article
- ISSN
- 1549-3296
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A new class of organic–inorganic nanocomposites, to be used as coatings for surface enhancement of metal implants for bone replacement and repair, has been prepared by a biomimetic three‐step procedure: (1) embedding amorphous calcium phosphate (ACP) particles between organic polyelectrolyte multilayers (PE MLs), (2) in situ transformation of ACP to octacalcium phospate (OCP) and/or poorly crystalline apatite nanocrystals by immersion of the material into a metastable calcifying solution (MCS) and (3) deposition of a final PE ML. The organic polyelectrolytes used were poly‐L‐glutamic acid and poly‐L‐lysine. The nanocomposites obtained by each successive step were characterized by scanning electron microscopy, energy dispersive X‐ray analysis (EDS), and XRD, and their suitability as coatings for metal implants was examined by mechanical and in vitro biological tests. Coatings obtained by the first deposition step are mechanically unstable and therefore not suitable. During the second step, upon immersion into MCS, ACP particles were transformed into crystalline calcium phosphate, with large platelike OCP crystals as the top layer. After phase transformation, the nanocomposite was strongly attached to the titanium, but the top layer did not promote cell proliferation. However, when the coating was topped with an additional PE ML (step 3), smoother surfaces were obtained, which facilitated cell adhesion and proliferation as shown by in vitro biological tests using primary human osteoblasts (HO) directly seeded onto the nanocomposites. In fact, cell proliferation on nanocomposites with top PE MLs was far superior than on any of the individual components and was equivalent to proliferation on the golden standard (plastic). © 2008 Wiley Periodicals, Inc. J Biomed Mater Res, 2009
📜 SIMILAR VOLUMES
## Abstract **Summary:** Organic‐inorganic hybrids synthesized by a dual photopolymerization and condensation process from (__i__) two organic precursors, either poly(ethylene glycol) __α__,__ω__ diacrylate ($\overline M \_{\rm w}$ = 600) (PEGDA) or bisphenol‐A‐ethoxylate(15EO/phenol)‐dimethacrylat
Glass coatings on Ti6Al4V were prepared using a simple enameling technique. The composition of the glasses was tailored to match the thermal expansion of Ti6Al4V. By controlling the firing atmosphere, time, and temperature, it was possible to control the reactivity between the glass and the alloy an
## Abstract A new technique to biomimetic deposition calcium phosphate (BDCaP) coating onto rough titanium substrates has been developed recently. This biomimetic deposition technique seems to be promising. It appears to have some advantages such as an inexpensive and simple set‐up, and the possibi