✦ LIBER ✦

Atomistic study of metastable phases in an Al-3wt.%-Li-0.12wt.%-Zr alloy

✍ Scribed by Toshio Sakurai; A. Kobayashi; Y. Hasegawa; A. Sakai; H.W. Pickering

Book ID: 116062251
Publisher: Elsevier Science
Year: 1986
Weight: 483 KB
Volume: 20
Category: Article
ISSN: 0036-9748
DOI: 10.1016/0036-9748(86)90189-4

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Steady State Creep during Metastable Pha

Steady State Creep during Metastable Phase Transition in Al–16 wt% Ag and Al–16 wt% Ag–0.1 wt% Zr Alloys

✍ Deaf, G. H. ;Youssef, S. B. ;Mahmoud, M. A. 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 288 KB

The early stages of decomposition of Guinier-Preston zones (G.P. zones) in Al±16 wt% Ag and Al±16 wt% Ag±0.1 wt% Zr alloys were investigated through creep measurements and electron microscopy observations. It was found that the strengthening and softening of the alloys has been achieved during the f

The stability of the β phase in Zr-3wt.%

The stability of the β phase in Zr-3wt.%Mo and Zr-3wt.%Mo-1wt.%Al alloys

✍ Derek O. Northwood 📂 Article 📅 1978 🏛 Elsevier Science ⚖ 309 KB

Comments on “Electron microscopic analys

Comments on “Electron microscopic analysis of composite precipitates in an Al-2.21 WT%Li-0.14WT%Zr alloy”

✍ Frank W. Gayle; John B. Vander Sande 📂 Article 📅 1989 🏛 Elsevier Science ⚖ 209 KB

Characterization of dispersed intermetal

Characterization of dispersed intermetallic phases in an Al-8.32wt%Fe-3.4wt%Ce alloy

✍ L. C. Zhang; A. Q. He; H. Q. Ye; C. Huang; Y. C. Zhang 📂 Article 📅 2002 🏛 Springer 🌐 English ⚖ 559 KB

Crystallographic features of the primary

Crystallographic features of the primary Al3Zr phase in as-cast Al-1.36 wt% Zr alloy

✍ Lei Li; Yudong Zhang; Claude Esling; Huixue Jiang; Zhihao Zhao; Yubo Zuo; Jianzh 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 792 KB

The habit and morphology of the primary Al 3 Zr crystals formed during the solidification of Al-1.36 wt% Zr alloy were analyzed. It was observed that the crystals have a tabular habit. The longitudinal cuts of the smaller and larger sized crystals appear, respectively, in octagonal and rectangular f

Investigation of trace elements in an Al

Investigation of trace elements in an Al–4.8 wt.% Mg–0.3 wt.% Mn alloy

✍ Christian J. Simensen; Ulf Södervall 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 249 KB

Sheets of alloy 5182 are commonly made by direct chilled (DC) casting and subsequent homogenisation and hot rolling. One major problem is cracking of the edges during hot rolling. This is a microstructure investigation of sodium and other trace elements, which have been found to contribute to edge c