𝔖 Scriptorium
✦   LIBER   ✦

πŸ“

Applied dynamic programming for optimization of dynamical systems

✍ Scribed by Rush D. Robinett III, David G. Wilson, G. Richard Eisler, John E. Hurtado


Publisher
Society for Industrial and Applied Mathematic
Year
2005
Tongue
English
Leaves
279
Series
Advances in Design and Control
Category
Library

⬇  Acquire This Volume

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Applied Dynamic Programming for Optimiza
✍ Rush D. Robinett III, David G. Wilson, G. Richard Eisler, John E. Hurtado πŸ“‚ Library πŸ“… 2005 πŸ› Society for Industrial and Applied Mathematic 🌐 English

Based on the results of over 10 years of research and development by the authors, this book presents a broad cross section of dynamic programming (DP) techniques applied to the optimization of dynamical systems. The main goal of the research effort was to develop a robust path planning/trajectory op

Applied Dynamic Programming for Optimiza
✍ Rush D. Robinett III, David G. Wilson, G. Richard Eisler, John E. Hurtado πŸ“‚ Library πŸ“… 2005 πŸ› Society for Industrial and Applied Mathematic 🌐 English

Based on the results of over 10 years of research and development by the authors, this book presents a broad cross section of dynamic programming (DP) techniques applied to the optimization of dynamical systems. The main goal of the research effort was to develop a robust path planning/trajectory op

Optimal Reference Shaping for Dynamical
✍ Tarunraj Singh πŸ“‚ Library πŸ“… 2009 πŸ› CRC Press 🌐 English

Integrating feedforward control with feedback control can significantly improve the performance of control systems compared to using feedback control alone. Focusing on feedforward control techniques, Optimal Reference Shaping for Dynamical Systems: Theory and Applications lucidly covers the various

Optimization of Dynamic Systems
✍ Sunil Kumar Agrawal, Brian C. Fabien (auth.) πŸ“‚ Library πŸ“… 1999 πŸ› Springer Netherlands 🌐 English

<p>This textbook deals with optimization of dynamic systems. The motivation for undertaking this task is as follows: There is an ever increasing need to produce more efficient, accurate, and lightweight mechanical and electromechanical deΒ­ vices. Thus, the typical graduating B.S. and M.S. candidate