✦ LIBER ✦

Application of the symmetrized transmission-line matrix method to the cold modelling of magnetrons

✍ Scribed by R. Allen; M. J. Clark

Publisher: John Wiley and Sons
Year: 1988
Tongue: English
Weight: 692 KB
Volume: 1
Category: Article
ISSN: 0894-3370
DOI: 10.1002/jnm.1660010108

No coin nor oath required. For personal study only.

✦ Synopsis

Two-and three-dimensional electromagnetic resonance calculations have been performed on rising-sun magnetron structures. These calculations have been made using the transmission-line matrix method. Cylindrical coordinates have been used in order to facilitate modelling of the essentially cylindrical device. Recent improvements to the TLM technique, such as the development of the symmetric condensed node for electromagnetics, have been fully exploited. The numerical procedure is described, the modelling process is discussed, and the results obtained are evaluated in comparisons with corresponding empirical data.

📜 SIMILAR VOLUMES

Applications of the transmission matrix

Applications of the transmission matrix method to gamma transport

✍ E. Thomas Boulette; Alfred F. Rohach 📂 Article 📅 1969 🏛 Elsevier Science 🌐 English ⚖ 451 KB

The 3D transmission-line matrix method:

The 3D transmission-line matrix method: Theory and comparison of the processes

✍ P. Saguet 📂 Article 📅 1989 🏛 John Wiley and Sons 🌐 English ⚖ 530 KB

This paper presents an overview of the 3D transmission-line matrix method of analysis, describing the various nodes which are available to date: expanded node, asymmetrical condensed node. symmetrical condensed node. The most general scattering matrices of these nodes are given. The various techniqu

Modelling of thermal diffusion in three

Modelling of thermal diffusion in three dimensions by the transmission line matrix method and the incorporation of nonlinear thermal properties

✍ Pulko, S. H. ;Johns, P. B. 📂 Article 📅 1987 🏛 Wiley (John Wiley & Sons) 🌐 English ⚖ 369 KB 👁 2 views

Transmission-line modelling of the class

Transmission-line modelling of the class E amplifier with an analytical method

✍ Yu-on Yam; Chi-wai Cheung; Chi-hung Li 📂 Article 📅 1995 🏛 John Wiley and Sons 🌐 English ⚖ 530 KB

The transmission line modelling (TLM) technique was used to simulate the class E power amplifier. An analytical method is also used to fix the required component values to ensure the desired output performance of the amplifier. An experiment was carried out to verify the simulation result of the com

A difficulty in numerically solving the

A difficulty in numerically solving the telegraph and the diffusion equations by means of the transmission line matrix modelling method (TLM)

✍ Peter Enders; Christian Vanneste 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 59 KB

## Abstract A stub leakage resistor at the nodes of an otherwise lossless TLM chain (i.e. without series resistors) introduces losses, although the corresponding absorption term in the Telegraphers' equation vanishes due to the absence of series resistors. This contradiction is outlined, an explana

Development of the transmission line mat

Development of the transmission line matrix method in acoustics applications to higher modes in the vocal tract and other complex ducts

✍ Samir El-Masri; Xavier Pelorson; Pierre Saguet; Pierre Badin 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 369 KB 👁 2 views

Most traditional theories of speech production are currently based on plane waves. However, it is well known that, for acoustic waveguides, higher acoustical modes start to propagate and can become predominant above cut-on frequencies. This paper thus presents the transmission line matrix method, a